Apple is a very popular, but at the same time quite expensive brand of smartphones, which leads to constant attempts on the part of users to save money somewhere, find cheaper ones, and so on. It's getting to the point where people are buying Chinese copies of the iPhone. They look very similar, sometimes it’s even impossible to tell them apart, but the whole difference lies not in the body, but in the details and operating system. Obviously, Chinese copies perform much worse than original iPhones. Problems in the system and various types of malfunctions occur much more often. Reinstalling the operating system helps improve the situation. In this article we will figure out how to flash or reflash a Chinese copy of an iPhone. Let's get started. Go!
How to update software on a replica Apple smartphone - in our new article
The first step is to download the firmware for the specific version of the iPhone copy. 5, 5S, 6, 6S - each model has its own firmware version. Pay attention to this. It should also be noted that copies are produced not on iOS, but on Android with a shell that is similar in interface design to iOS.
After you have downloaded the firmware, you need to download a special utility for flashing smartphones, . Then unpack the archives with the firmware and installer files into a convenient folder on your disk.
Now go to the folder with Flash Tool and run the utility as an administrator. After the program opens, click on the “Scatter loading” button and specify the path to the sketch file, which is located in the folder with the firmware. Essentially, it is a text file with a “.txt” extension. Once you select it, click the “Open” button. Next, you need to click “Download” and connect the phone to your computer or laptop using a cable, while holding down the “Home” button on the device itself. In the Flash Tool window, you will see a red line at the bottom, this means that the “Home” button can be released. Immediately after this, a purple line will appear, followed by a yellow one. Yellow indicates that the firmware is loading. Once the installation is complete, a window will appear on the screen indicating that the firmware has been successfully installed.
Then unplug the cable from your phone, close the Flash Tool, and turn on your copy of the iPhone. Turning on the device for the first time after flashing may take quite a long time, so don’t be alarmed right away. After the phone boots up, you need to install the Russian language, since after the first turn on all the signatures in the smartphone are in Chinese. Open the Settings menu and go to a section similar to the General section on the original iPhone. To find the “Language” item, look at the pictures on the Internet where this item is approximately located. Finally, once you get where you need to be, select Russian from the list. To confirm your choice, click the button located in the upper right corner of the screen. After this, you may need to install a third-party keyboard, since the built-in one may not work. You can use GO Keyboard or any other one. You can download it from the app store or download it and copy it to your memory card. All. Now you can use the device comfortably.
Now, to get rid of the Android lock screen and make it the same as on iOS, you need to open the Phone app and go to dial. Next, enter a very simple code *#8000#. After this, the phone will begin to reboot. Wait a while. If after turning on nothing has changed, repeat the same thing again. During boot, you will see a screen with the Apple logo, not the Chinese manufacturer, and the lockscreen will be as similar as possible to the original iOS lockscreen. Ready. Now the Chinese copy has become as similar as possible to the original iPhone.
This is how you can independently reflash Chinese copies of iPhones 5/5s, 6/6s on Android. Write in the comments if this article was useful to you, and tell other users how you coped with flashing your phone.
Chinese copies of the iPhone running the Android operating system have become an excellent replacement for the expensive counterparts of the American company. Their advantage is that outwardly they are practically indistinguishable from the usual “Apple” gadgets, but inside they have all the advantages of Android devices. However, the only drawback of such devices is the firmware, which the user must update himself. In this post, you will learn what the latest firmware is for a Chinese iPhone on Android, and how to install it correctly on the device.
It should be noted that the program has an intuitive interface in English. Any Android device user can understand its functionality.
As for the installation issue, you won’t have to worry for long. It is enough to unpack the archive with the program to any directory on your PC. The program is launched according to the standard from a file with the extension .exe.
To flash the firmware for an Android iPhone, it is not enough to simply connect the device to a computer with the Flash Tool application running. You should definitely keep your finger on the Home button. This way you give your smartphone permission to make software changes. In fact, this is a kind of entry into safe mode, but without additional manipulations.
You must hold the button until a red line appears in the flasher window, which means that the utility has found the device and is ready to start flashing it.
When you release your finger from the Home button, the boot bar will change color to purple, which means the device is checked to ensure it meets all the fundamental parameters. As soon as the check is completed, a yellow loading line will appear in the program window, indicating the installation process.
Do not interfere with this process under any circumstances. Otherwise the installation will fail.
After flashing the device and disconnecting it from the computer, you get a turned off gadget, ready to start. Press and hold the power button until the bootloader icon appears.
By the way, after flashing, instead of the standard Apple logo, you can see a green robot. This effect can be corrected if necessary.
As for the download itself, it can take several minutes. The reason for this is the process of updating system databases and settings in accordance with interface algorithms.
Flash Tool deals exclusively with database replacement. Basic setup and adaptation to the new OS takes place during the first launch. Do not remove the battery and press all the keys randomly. Wait for the process to complete.
Once the installation process is complete and you see the familiar but updated interface of the iOS shell superimposed on Android, you will have to start setting up the language.
Depending on the new firmware installed, the default language may be English or even Chinese. To change the language, you will need to go to the “General” settings section and find the “Language” item in it.
If you have reset your smartphone to Chinese, check out the examples of pictures on the Internet that are located next to the “Language” column. Once you find the desired setting, all you have to do is change the language with just a couple of taps on the screen.
It should be noted that when choosing Russian or any other language, you will have to confirm the process. To do this, click on the button in the upper right corner of the screen.
On many versions of Android iPhones, the keyboard initially does not work correctly, which is why you will definitely agree to replace it with a working software product from a third-party developer. An excellent example of this type of utility is GO Keyboard.
You can install the program directly from the Play Market. It is free and can be installed on any version of iPhone running Android OS.
The program will delight you with an intuitive, customizable interface. You can independently change the keyboard display style, its size and select the current set of functions in the toolbar.
When you boot up an Android iPhone with updated firmware, you may encounter the classic Android lock screen, as well as the familiar green robot. The usual combination of numbers and symbols can correct this situation and return the classic bootloader and iOS lockscreen.
When the question is about how to flash a Chinese iPhone 5s on Android, the answer implies a similar pre-flash as for any device running on Android.
If you clearly state what is needed to flash the device, you will get a simple list of actions.
All you need to flash a Chinese iPhone is:
The multitasking view also introduces users to application management. This means that users can close active applications from the multitasking menu. Here is a list of specifications specified. We like to think that our text messages and other information stored on our cell phones are "For Our Eyes Only," but unfortunately, that's not always the case.
The adaptation naturally also took the opportunity to apologize to its partners and users. If so, here's what you can do to find out if your phone is still in the crosshairs data collection. First check if it is indeed the affected model.
The problem, in fact, is not how to flash a Chinese iPhone 5s, but in finding suitable drivers and firmware, and from the manufacturer whose “product” the purchased iPhone is. A driver is absolutely necessary; it helps to combine the device with the computer, and then reflash the whole or a specific partition. It is recommended to start flashing if the iPhone is charged at least sixty percent.
If you have one of these devices, open Settings in your app drawer. Scroll down and tap Apps in the Settings menu. Inside, select the menu icon in the top right corner. Moreover, it gives the device a significant screen-to-occupant ratio of 80 percent.
Documents as a condition of warranty and a quick guide are hidden under. The back of the case is made of ceramic; no scratches were visible after testing the device for two weeks. If you want to protect your device, just grab the included hard shell that has a similar color to the back. The back itself remains quite plain, with only the camera sensor with a gold frame standing out. Headphones are not included. This can be changed during setup, but only in English. Playing and changing, as well as getting started is a pleasure from the hands.
First you need to run the flasher program, for example, SP Flash Tool.
Select "" in the program window that opens. Explorer will open, in which you will need to find the folder with the firmware, and in it go to target_bin and select the file with the corresponding processor. For example, XXX_Android_scatter_emmc.txt(in which XXX- processor number). Leave the program open.
The video could not be played. Please try again later. Quick shots are sometimes blurry, and not all subjects benefit from this mode. Overall, shots are still rewarding, and the optical image stabilization ensures that shake shots are usually successful. By the way, to take self-portraits with the front camera, the device must be rotated 180 degrees, because the corresponding camera is located on the bottom of the device - unfortunately, a little inconvenient.
The software takes a bit of getting used to in the beginning and is not designed for third party launchers: if you don't like the apps on your home screen that have always been standard, then you are looking for an alternative launcher. With a so-called on-time of more than five hours of battery charge, even powered users can expect one day's battery life - without unplugging.
The next step is to install drivers. To do this, you need to open " device Manager", and turn off the iPhone. Remove the battery from the device and immediately insert it back. After this, you need to connect the phone to your personal computer using a USB cable. In the window " device Manager" will be highlighted with a yellow icon, you must click on " Update drivers" In the explorer that opens, specify the path to the corresponding folder with drivers.
Now, in order to change the Android lock on the screen and make it the same as on iOS, you need to open the “Phone” button on the screen and go to dialing. Next you need to enter a fairly common code *#8000#. After which the phone should reboot. You should wait a few minutes. If after switching on nothing has changed, you need to repeat this action again. During the boot period, you will be able to see the Apple logo on the screen, not the Chinese manufacturer, and the lockscreen will be very similar to the unique iOS lockscreen. Done. Now the Chinese iPhone has become very similar to the unique iPhone. In just a few minutes it is possible to reflash without the help of others
The answer is actually quite simple. Step 5 - Select US or other preferred country. Step 6 - Scroll to the bottom of this extremely long agreement and select agreement. Rest if your finger gets tired before you reach the bottom. If you have previously downloaded apps from an app store in China and need to update them, this will not work.
Version suffix numbers contain 17 digits, separated by a “.”. symbol. Ideally, you can get the latest firmware from your vendor. Note. When you are on the firmware download page. There is a drop-down list in the upper right corner.
iPhone smartphones are rightfully considered one of the most popular in recent years. But not everyone can afford their cost. The contradiction between the high price and popularity took its toll, and no less popular Chinese analogues of iPhone copies appeared, outwardly no different from the original. As the demand for copies increases, so do the needs of users directly or indirectly related to these devices, including the ability to reflash Android on Chinese iPhone at home.
Despite the ideal appearance, the internal shell with functionality is weak and resembles the original only in the interface; the smartphone itself runs on the Android OS. All working elements of such analogues are of dubious origin. And software is no exception; in case of failure, the question of flashing and how to do it will arise.
You can learn more about iPhone copies in our reviews and customer reviews
|
and review |
|
and review |
|
and review |
|
and review |
To ensure a complete flashing of the smartphone, you will need the following several utilities:
Another undoubtedly best option for a budget purchase is. Read the full review and reviews from owners of the replica about their impressions and conclusions from purchasing a smartphone.
To start installing the firmware, you need to run the previously downloaded Flash Tool program (on behalf of the Administrator!) and specify the path to the text sketch file and click the “Open” button.
The next step is to hold down the “Home” button on your smartphone and, without releasing it, connect the device to the PC (laptop) using a USB cable; when finished, select “Downloads” in the Flash Tool. If the connection is successful, the program will display three lines: red, purple and yellow. The first line notifies that the “Home” button on the device can be released, and the last line indicates the successful process of installing system files on the smartphone.
The overall flashing speed depends on the quality of the Chinese phone's shell. When the process completes successfully, Flash Tool will open a notification dialog box. You can disconnect the phone and close the utility. You won't need a computer anymore.
Firmware alone is not enough and, for a fully working interface, you need to change the smartphone settings. It is impossible to return the user's settings to the firmware and will have to be configured again. You can turn on the device, but you will have to wait a little - the first turn on after flashing the firmware is always a long one. What immediately catches your eye is the Chinese characters. This is normal and you should not panic, because the manufacturer is Chinese. You just need to set the Russian language in the settings. There are several options to find a menu with language selection:
In any case, the task is not fatal and changing the language is only a matter of time. And the last procedure, installing a Russian-language keyboard. Not every firmware build provides this utility for a smartphone. In the absence of one, the only option for installing a comfortable and functional keyboard is to purchase it on Google Play. To circumvent this nuance, it was necessary to download the keyboard to the computer in advance. Now the phone can be connected to the car again and a full keyboard can be installed.
This completes the setup procedure, all that remains is to use minor functionality (mode, volume, date and time) and the device is completely ready for use. How to reflash a Chinese iPhone - very simply and without complicated measures. The whole process required only a PC with Internet access, several utilities and a little more than one hour of free time.
iPhone is one of the most popular brands of phones, but it is also very expensive. Chinese copies of phones, of course, are not as productive, but they look impressive. But the Chinese firmware leaves much to be desired.
The first switching on will not happen very quickly, about 3-4 minutes. It depends on the parameters of your copy.
ATTENTION!
After the first boot, the phone will be in a random language, that is, Chinese. To reinstall the language, look at the tutorials on the Internet. Well, if you need maximum resemblance to the original, then go to the dialing menu and see this code *#8000#.
After entering this code, the phone will begin to reboot automatically. If nothing changes, then perform the operation several times.
Another method of flashing is more extreme, so we advise you to save a copy. If suddenly the firmware gets stuck, this will allow you to bring the necessary contacts, videos, and even the phone itself back to life.
So let's get started:
All you have to do is wait for it to complete and the firmware will be installed!
