This official instructions for Explay N1 in Russian, which is suitable for Android 4.2. If you have updated your Explay smartphone to a more “fresh” version or “rolled back” to an earlier one, then you should try others detailed instructions instructions for use, which will be presented below. We also suggest that you familiarize yourself with the quick user instructions in question-answer format.
Explay official website?
You have come to the right place, because all the information from the official website of Explay, as well as a lot of other useful content, is collected here.
Settings->About phone:: Android version(a few clicks on the item will launch " Easter Egg") ["Out of the box" Android OS version - 4.2].
We continue to configure the smartphone
How to update drivers on Explay
You need to go to "Settings -> About phone -> Kernel version"
How to enable Russian keyboard layout
Go to the section "Settings->Language and input->Select language"
How to connect 4g or switch to 2G, 3G
"Settings-> More-> Mobile network-> Data transfer"
What to do if you turned it on child mode and forgot my password
Go to "Settings-> Language and keyboard-> section (keyboard and input methods)-> check the box next to "Google voice input"
.png)
Settings->Display:: Auto-rotate screen (uncheck)
How to set a melody for an alarm clock?
.png)
Settings->Display->Brightness->right (increase); left (decrease); AUTO (automatic adjustment).
.jpg)
Settings->Battery->Energy Saving (check the box)
Enable display of battery charge status as a percentage
Settings->Battery->Battery Charge
How to transfer phone numbers from a SIM card to the phone memory? Importing numbers from a SIM card
How to add a contact to the blacklist or block a phone number?
How to set up the Internet if the Internet does not work (for example, MTS, Beeline, Tele2, Life)
How to set a ringtone for a subscriber so that each number has its own melody
Go to the Contacts application -> Select the desired contact -> click on it -> open the menu (3 vertical dots) -> Set ringtone
How to disable or enable key vibration feedback?
Go to Settings->Language and input -> Android keyboard or Google keyboard-> Vibration response of keys (uncheck or uncheck)
How to set a ringtone for an SMS message or change alert sounds?
Read the instructions for
How to find out which processor is on N1?
You need to look at the characteristics of N1 (link above). We know that in this modification of the device the chipset is 1000 MHz.
.png)
Settings->For Developers->USB Debugging
If there is no "For Developers" item?
Follow the instructions
.png)
Settings->Data transfer->Mobile traffic.
Settings->More->Mobile network->3G/4G services (if the operator does not support, select only 2G)
How to change or add input language on the keyboard?
Settings-> Language and input-> Android keyboard-> settings icon-> Input languages (check the box next to the ones you need)
Even modern gadgets at high level technology developments may fail. There are often cases when your smartphone simply does not want to turn on. Many people fall into a stupor and don’t even know what to do if their phone doesn’t turn on. We will present the most common causes of this failure, as well as possible solutions.
In most cases, the problem is related to the gadget's battery. A less common option is problems with the operating system. Before taking your device to a service center and preparing money for repairs, we recommend taking a few independent steps to identify the problem. The problem may be trivial, which you can solve without outside help.
There are several reasons why your phone won't turn on. Perhaps the battery is simply dead and charging is not having any effect. This is the most popular problem, but there may be several reasons:
As you can see, users can solve most problems on their own if the phone does not turn on. To extend the life of the battery, do not frequently discharge the gadget to zero, but use only certified chargers from the manufacturer.
The problem may be that you inserted an SD card into the gadget that the smartphone does not support. This may lead to failures in the program code and impossibility of inclusion. How to turn on the gadget? Just slide out the wrong memory card. If it still does not activate, you may have to reflash your smartphone.
Beforehand, always read the specifications which memory cards your mobile device supports and up to what capacity. You can also get advice from mobile showroom sellers.
On some smartphones, the transition is carried out by pressing “+.- volume” and the “Power” button. Using the volume keys, you need to move the slider to the line “Wipe data/factory reset”, and then confirm your choice by clicking “Yes - delete all user data”.
You will be able to clear the cash and data section. But be careful as all personal data (photos, contacts, videos and apps) will be lost. If there is something important on your phone, contact the service center.
This is relevant if loading your phone hangs at the “Android” icon. This also indicates that the firmware is not working correctly. On some devices there is a special button that can only be pressed with a needle or toothpick.
If your phone won't boot, there may be files operating system have been damaged by some virus. Here you will need to reflash the phone. In some service centers specialists will be able to restore the phone’s functionality by cleaning it from viruses. To avoid such situations, we recommend downloading applications only from the official Play Store and installing an antivirus. You can choose ESET or Dr.Web for mobile devices.
Teach! Explay Power And Explay Power Bank - that's two different phones, the first was produced earlier, but is now discontinued, and the second, on this moment, is produced and supplied to stores. But, settings engineering menu, they are similar, and the login code is the same.
And, in principle, the basic settings described in this article may be suitable for many Chinese phones.
It took two days and two sleepless nights to write this article and tinker with the settings; the phone was reflashed twice (plus twice unsuccessfully using the MultiPort program)...
Using this menu, you can increase or decrease the volume during a conversation, increase or decrease the maximum volume of the call, audio player, key sound, configure the battery, enable automatic recording of conversations, and much more.
Code to enter the engineering menu: *39*3646#
ATTENTION!
There are known cases of complete failure of Explay Power phones after " playful crooked hands", which " they pressed something there" and after that the phone completely stopped turning on and working, sometimes it even becomes impossible to reflash it and all that remains is to take it to the service center, and this is nerves + time + money, and no guarantees from the service center.
Do not change unfamiliar settings if you are not sure!
YOU ONLY ARE RESPONSIBLE FOR ALL ACTIONS WITH YOUR PHONE!
Although the Explay Power phone has been discontinued ( it's a pity! The flashlight turns on conveniently, regardless of the battery charge and whether the phone is turned on), but was not that expensive ( 1950 rubles about a year ago), so you can experiment in principle, if you don’t mind...
But I did NOT have any special irreparable problems, so see for yourself.
If the phone still does not turn on after these manipulations, or other problems arise serious problems, then try to reflash it again according to these instructions on the forum forum.explays.ru, this will reset the engineering menu settings, BUT, for this, in the settings FlashTool you will have to check the box " Format Fat" (third tick), which will lead to IMEI RESET , which we don't need.
And you can restore it only from a previously made backup, but at the same time, the engineering menu settings will be restored again - a vicious circle...
All SMS in the phone are also deleted and the phone memory is erased ( although the memory there is... 145 kilobytes, but still, I store a beautiful desktop background in it, so that if there are problems with the flash drive, the standard background is not installed - I recommend doing the same).
To do this, first remove the SIM cards, and preferably the flash drive. Find this item in your phone settings menu, select " Restore everything", enter the phone code ( default 0000), and all settings will be reset, as well as SMS, the contents of the phone memory, contacts in the phone memory - all this will be deleted again, but the IMEI will remain the same, which is what we need.
And before any actions with the phone, MAKE A BACKUP using the program FlashTool, instructions are also on the forum, follow the link above!
Regarding audio settings. Please note that in the Explay Power engineering menu, some values, for example for the parameters " Volume" and others, you cannot enter using the numeric keypad, only with the joystick - the " key Up" And " Down".
Accordingly, if you start changing the number from " 0
"the numbers will be even if you scroll down the opposite way from 255
, then the numbers will be odd - it’s not scary.
If you see a value here, for example " 123
", but it’s only possible to set 124
or 122
, 120
, or vice versa, then it’s okay - choose the closest value.
Or you can be perverted - “scroll” to zero or 255 , and then back to the desired value, but doing so is pointless. Plus minus 1 -2 It won’t play a role here, especially since I just came up with these values out of the blue, by trial and error, maybe I made a mistake somewhere, but I’m happy with everything about the phone’s operation ( Almost all).
Apply settings in the engineering menu: enter a new value (or all values within one item), press " SET", go back a couple of points using the " key Back", then the phone will ask: Update Parameter?- click " Yes", and after that we either exit the menu completely or continue setting up.
Akhtung! After some settings, the phone may need to reboot ( turn off and on), but in the case of audio settings, in the vast majority of cases this is not necessary.
Just after turning on the phone again, the phone may malfunction, it is better to check this by calling it and using an audio player.
And further: " Max analog gain" And " step" V " 16 Level Setting" - is always the same for all parameters in the current mode: microphone, radio, speaker, etc., it is enough to change it once in any of the points of each mode. It affects the sixteen-level volume control, and, in fact, the overall volume of all ( or almost everyone, this is where I’m a little unclear myself) points of each of the three modes.
Don't be confused!
Black font, next to the names of the parameters - the new values that I set when setting up the phone are indicated.
[Blue font in square brackets] - standard parameter values are indicated, which are set immediately after flashing Explay Power with the firmware version 1.03 .
Go!
Open the engineering menu in Explay Power, to do this we type on the keyboard *39*3646# , and here first let's select the item " Audio" - audio settings:
Set Mode- selects the current mode for tests, you can leave it alone, it’s almost a useless thing.
Normal Mode (normal mode, here you can adjust the volume of the call without a headset and withoutspeakerphone, i.e. via front speaker, key volume, sensitivitymicrophone, etc.):
---
FIR (Explay Power owners write on the Internet that you need to set the value " 2
" or " 3
", Thisimproves the audibility of the interlocutor during a conversation and increases the quality of the voice in general - II personally didn’t notice any obvious changes, but just in case I changed it to " 2
" - it's worsedefinitely gone): 2
(Was : 0
)
---
Speech (volume of the interlocutor's voice on the phone):
Volume 0: 64
Volume 1: 72
Volume 2: 100
Volume 3: 128
Volume 4: 156
Volume 5: 208
Volume 6: 255
16 Level Setting
Max analog gain: 172(we change it once, and then in normal mode it is the same for all items)
Step : 4 (we don't change, it was 4
)
---
Key Tone (key press volume):
Volume 0: 84
Volume 1: 103
Volume 2: 123
Volume 3: 143
Volume 4: 163
Volume 5: 183
Volume 6: 203
16 Level Setting
Max analog gain: 172 [112
]
Step : 4
---
Melody (volume of the ringer, namely the ringer, but NOT the PLAYER):
Volume 0:4
Volume 1: 8
Volume 2: 20
Volume 3: 48
Volume 4: 72
Volume 5: 100
Volume 6: 128
16 Level Setting
Max analog gain: 172 [112
]
Step : 4
---
FM Radio (the volume of the FM radio, to be honest, I don’t understand in which mode - loudspeaker or normal, and I didn’t check (too lazy), where exactly the volume of the radio depends at this point, because 3 modes: ordinary, speaker And headset, but the radio can only be played " into the speaker" And " into the earphone", why then the third mode? But just in case, I changed it, and logically it is this normal mode that should influence playback through the speaker):
Volume 0: 16
Volume 1: 48
Volume 2: 88
Volume 3: 112
Volume 4: 152
Volume 5: 204
Volume 6: 255
16 Level Setting
Max analog gain: 172 [112
]
Step : 4
---
Microphone (microphone sensitivity during a normal call, not through a headset and withoutspeakerphone, you can’t do too much, the interlocutor will hear wheezing and you willhear an echo with frequent pauses, I increased it just a little):
Volume 0: 192
Volume 1: 192
Volume 2: 192
Volume 3: 192 ---| WHY ARE THE STANDARD VALUES SUCH STRANGE?!
Volume 4: 192 ---|
Volume 5: 192
Volume 6: 192
16 Level Setting
Max analog gain: 172 [112
]
Step : 4
---
Side Tone (this parameter in all modes was equal to zero, better not change it, otherwisein a conversation you will hear yourself and not your interlocutor, in general you don’t need to touch): 0
LoudSp Mode (loudspeaker mode, this is the same as normal mode, only changesrelate to talking on the phone and playing music through the player):
---
Speech (volume of the interlocutor's voice during speakerphone)
Volume 0: 16
Volume 1: 32
Volume 2: 60
Volume 3: 100
Volume 4: 148
Volume 5: 200
Volume 6: 255
16 Level Setting
Max analog gain
(change once for all loudspeaker mode parameters, similar to normal mode): 200
Step : 4 (we don't change, it was 4
)
---
Key Tone (volume of keystrokes during speakerphone, at factory settings it is TOO loud, turn it down to minimum):
Volume 0:4
Volume 1: 4
Volume 2: 4
Volume 3: 4
Volume 4: 4
Volume 5: 4
Volume 6: 4
16 Level Setting
Max analog gain: 200
Step : 4
---
Melody (the volume of music playback in the player, while the sound at full volume is a little wheezing, but it is loud, but I highly recommend turning the player volume all the way up, this drains the battery very quickly, and accordingly reduces its service life faster, but it is loud, a little bit of a couple of tracks is sometimes possible, and on quiet tracks it will be especially useful to turn it up louder):
Volume 0:4
Volume 1: 24
Volume 2: 44
Volume 3: 96
Volume 4: 140
Volume 5: 200
Volume 6: 255
16 Level Setting
Max analog gain: 200
Step : 4
---
FM Radio (unclear, just like in normal mode, which mode regulates the volume of the radio playback through the speaker, but still we change it everywhere, the radio itself is usually quiet here, so we do it to the fullest):
Volume 0 : 20
Volume 1: 40
Volume 2: 80
Volume 3: 120
Volume 4: 148
Volume 5: 200
Volume 6: 255
16 Level Setting
Max analog gain: 200
Step : 4
---
Microphone (microphone sensitivity when talking using speakerphone toodon't overdo it):
Volume 0: 192
Volume 1: 192
Volume 2: 192
Volume 3: 192
Volume 4: 196 --- again something is wrong...
Volume 5: 200
Volume 6: 208
16 Level Setting
Max analog gain: 200
Step : 4
---
Side Tone (do not change again, zero, as in the previous mode): 0
Headset Mode (headset mode, this is the same as the previous modes, only changesrelate to talking on the phone and playing music through the headset and its microphone):
---
Speech (volume of the interlocutor's voice when talking through a headset):
Volume 0:8
Volume 1: 16
Volume 2: 32
Volume 3: 72
Volume 4: 140
Volume 5: 172
Volume 6: 203
16 Level Setting
Max analog gain: 186 (as usual, we change only once in any of the points)
Step : 4 (we don't change)
---
Key Tone (turn down the volume of the key press sounds in the headset so that your head doesn’t hurt):
Volume 0: 67
Volume 1: 67
Volume 2: 67
Volume 3: 67
Volume 4: 67
Volume 5: 67
Volume 6: 67
16 Level Setting
Max analog gain: 186
Step : 4
---
Melody (volume of music playback in the headset - increase a little):
Volume 0:4
Volume 1: 24
Volume 2: 92
Volume 3: 120
Volume 4: 160
Volume 5: 200
Volume 6: 255
16 Level Setting
Max analog gain: 186
Step : 4
---
FM Radio(G Volume of FM radio music playback through the headset, increase as much as possiblelouder, otherwise it’s hard to hear):
Volume 0: 12
Volume 1: 28
Volume 2: 88
Volume 3: 120
Volume 4: 160
Volume 5: 200
Volume 6: 255
16 Level Setting
Max analog gain: 186
Step : 4
---
Microphone (headset microphone sensitivity, increase a little):
Volume 0: 212
Volume 1: 212
Volume 2: 212
Volume 3: 212
Volume 4: 212 --- and again the scatter... why did the developers do this?..
Volume 5: 212
Volume 6: 212
16 Level Setting
Max analog gain: 186
Step : 4
---
Side Tone(as usual, we don’t change): 0
We're done with the audio settings, let's go back.
Next there is a point: Ring Tone.
It can be used to listen to the sound of standard melodies directly from the engineering menu to understand how much we adjusted the volume ( they wheeze they don't wheeze), you can try after the change current mode in the first paragraph Set Mode, but it’s best to exit the engineering menu after all the changes and try to check everything “live” - call the phone, open the player, before doing this it is advisable to turn off and turn on the phone, because sometimes it starts to fail just after the next reboot - it was I had this happen once with these settings, everything seems to be fine, but when there is an incoming call at any volume, the melody wheezes and “like a pipe.” Only flashing Power helped, now after flashing with the same audio calibrations - everything is in order.
---
Speech Enhancement: we don’t touch it, this dregs are still the same, it’s not clear how and what, on the forums they write that at this point they change the properties of the DAC (Digital-to-Analog Converter) of the phone, but we don’t need it.
But, however, I still risked changing one parameter from there. As Explay Power owners everywhere write on the forums, you can change one parameter - and the voice of the interlocutor during a conversation becomes clearer and more intelligible.
Others say that it increases high frequencies when speaking, which has a very good effect on voice intelligibility. I personally didn’t notice anything like that, but just in case I changed it, maybe it’s really better this way, but not worse - which is the most important thing
Opening Speech Enhancement> choose Normal Mode> choose Parameter 6 it should be equal to " 400
", change this value to " 1
" and press OK.
And I changed a bunch of parameters in the sixth parameter with 400
on 1
also in Headset And LoudSP mode, and everything seems to be fine.
We leave from Speech Enhancement.
---
Next we see the parameter Max Swing which is somehow connected with vibration during calls (and SMS or something). And as soon as I didn’t change it, there was no difference. So we don’t touch it, it’s equal 12800
, let it be.
---
Next point Debug Info- something related to debugging, don’t go there.
---
And the last item in the audio parameters - Auto Record Setting.
There are settings for automatic recording of conversations, this is a useful thing, it quietly records all conversations on the memory card in the folder " Audio"But why the hell is this function hidden in the engineering menu, and why is it not in the phone menu Explay Power- unclear. Well, okay, the main thing is that there is.
There are two parameters:
VM Support
: off [off]- when the option is enabled, the voice recorder has the ability to record conversations other than formats AMR And WAW also in the format V.M.. What kind of format this is - it’s not clear to me, the phone can easily reproduce such recordings, but how can I reproduce this format on a computer *. V.M., or convert, it’s also not clear to me. That's why I didn't turn it on, let the recorder write better in WAV high quality, there is still a lot of space on the flash drive.
And actually the second parameter Auto Speech Record [off]- turns on or off automatic recording of all conversations.
Everything is on audio. After changing all the parameters, do not forget to go back a couple of points so that the settings are saved, and double-check them and then go to the engineering menu, in case something was not saved, or you forgot to change something - this happens.
This applies not only to audio properties, but also to all changes you make in the engineering menu.
What else is in the engineering menu Explay Power:
Network Setting- don't touch
GPRS Act- we don’t touch the tests either
Debug Info- we are also not interested in it
Bluetooth- there are some tests here, it’s better not to go there
There are two points left: " Misc." And " Device", these are the ones that interest us.
Let's start with something simple:
Misc.- by selecting this item, 5 parameters appear on the screen:
---
Auto Answer: off [off] (automatic reception of a call after a few seconds when the headset is connected, turn it off, not convenient)
---
RAM Test- when pressed, it tests some memory, there is no need to touch this item
---
Memory Dump
: off [off]- something is leaking somewhere ( memory), we don’t need it either, we don’t turn it on
---
Internet Application (the item has parameters, they relate to the built-in browser andMMS client, they set headers that are sent to opened sites on the Internet,through the built-in browser, for example, this phone can be detected by sites as Nokia N93.
all the settings can be changed - but there is no point in it - and even no show-off):
> User Agent
: default
(the header by which sites will determine the phone model, the default header, the sites, as I understand it, do not understand, and do not correctly identify the phone model as Explay Power, but you can install at least N72 - however, I repeat, this makes no sense)
> Accept Header
: WAP 2.0
(header by which sites determine in what format the site page should be sent to the phone)
> MMS Version: MMS 1.0
(MMS version, I don’t know what this parameter affects, let it be 1.0)
---
Auto Test List- a list of tested phone nodes, I don’t really know when this test passes (maybe when it is turned on, but it is unlikely, it would then blink and fart every time it was turned on, but this does not happen), maybe after entering a special one. code or when connecting to certain Chinese equipment for tests - I don’t even know. There is NO need to go in there and change anything!
---
IN misc. There’s nothing more to configure, let’s go back.
And the last item in the Explay Power engineering menu: Device- there are many parameters here, but you can only touch some of them where I was fiddling around, THE REST DO NOT TOUCH, I don’t know why they are needed, I don’t touch them, and I don’t advise you!
I'll list everything:
---
LCD - fine tuning display - it’s better not to touch it, otherwise you won’t see anything on the screen!
---
GPIO- absolutely not to touch, I don’t know why it’s there
---
PWM- it’s also unclear, we don’t touch it
---
ADC- and here you can see the battery voltage, charger voltage, something similar to the level of current consumption, well, in general, useful information (especially for calibrating the battery in Set Default Level, more on that below).
---
Set Default Level- the item has 5
subparagraphs, 4
of which it is better not to touch:
This MainLCD Contrast, PWM 1, PWM 2 And PWM 3- We don’t touch them, we don’t need it.
---
IN Set Default Level fifth point:
Battary- which is responsible for battery levels, it has 10 parameters(levels), which, if I’m not mistaken, are responsible for the displayed battery charge level, and indicate to the phone when to turn off the power when charging ( P correct me if I'm wrong
), and as a result of decreasing the first two parameters, you can slightly increase the battery life of the phone, BUT THIS WILL DECREASE BATTERY LIFE Slightly SO YOU DECIDE FOR YOURSELF(and where to find a new battery for Explay Power now is unclear), I experimentally reduced the first two parameters, now the phone does not seem to turn off at the most inopportune moment:
LEV 1: 3250000 [
3450000
]
LEV 2: 3450000 [
3500000
]
LEV 3: 3550000 [
3550000
]
LEV 4: 3600000 [
3600000
]
LEV 5: 3650000 [
3650000
]
LEV 6: 3700000 [
3700000
]
LEV 7: 3850000 [
3850000
]
LEV 8: 4050000 [
4050000
]
LEV 9: 9999999 [
9999999
]
LEV 10: 9999999 [
9999999
]
Basically, as I understand it ( again, correct me if I'm wrong
) - these levels are equal to the battery voltage in volts.
That is, for example, 3250000
= 3.25 volts, and the current voltage can be viewed in ADC, I wrote about this above. According to the current settings, it turns out that the phone will not turn off until the battery is discharged to 3.25 volts, not until 3,45
as it was before with factory settings and after flashing, which will slightly extend one charge, and although the phone will beep, it will ring and should not turn off ( Explay Power does not have the function of outgoing calls turned off when the battery charge is critically low, it will call until its last breath, but the new Explay Power Bank has such a DISADVANTAGE - there is still a lot of charge, but you can no longer make calls, only incoming calls. What's the point? Therefore, I like the old Explay Power better, and this is not its only advantage compared to the “power bank”, the “bank” of course has its advantages - but for me they are not important, I am the owner of Explay Power - and as a “dialer” it is completely satisfactory my requirements
).
And also, theoretically, in a completely emergency situation, when you need to make a call, maybe ambulance call, or call somewhere else, if your phone turns off, you can try to turn it on ( although most likely you won’t be able to do this without recharging for at least half a minute) and quickly go into the engineering menu before it turns off, turn down the first level LEV 1, for example until 3150000 , 3100000 , or even immediately before 3000000 , and again, theoretically, you will have time to make a couple of calls - but this is a very extreme case, you should not do this, you can damage the phone.
After all, it is unknown how the phone will behave at such a low voltage (it’s like plugging a computer into a power socket without 220
volt, and volt 80
- will it turn on at this voltage? Will it glitch and lose data on the disk? Here..), but I turned it down just a little, and everything seems to work fine.
---
Set UART- here is the port setting. This item is responsible for detecting the phone by the computer when connected via a USB cable. When fiddling with the settings Set UART, there is a chance to disable the COM port that appears during the firmware, if you disable it and mess up with the engineer, you won’t be able to flash it and return your phone to work, that’s why I don’t go there.
---
Sleep Mode
: Enable [
Enable]- we don’t change
---
DCM Mode
: Enable [
Enable]- we don’t change
---
FM Radio- at this point the settings of the FM radio receiver, there is no point in changing them, for some reason they are not saved...
---
PMU register settings- we don’t touch, I don’t know what kind of registers these are.
---
Some of these parameters may be compatible with the new Explay Power Bank, but this is not a fact, since the processors, characteristics, and, in the end, the speakers are different.
That's all the engineering menu is, and it's okay if you don't go where you don't need to! The most important thing is sound and battery.
I made all the volume settings, albeit “by eye,” but they allow you to slightly increase the sound beyond the possible factory settings, for example, in the player, loud tracks will wheeze, and quiet ones will be played louder, which is what I wrote about earlier.
If I missed something important or made a mistake somewhere, after all, the article turned out to be relatively long, I could have mixed up or forgotten something - write about it in the comments to the article, your options and adjustments to my calibrations are also welcome.
Updated: 09/24/2013 - 23:25
Error! JavaScript is disabled in your browser! Social bookmarks, inserting bb codes and emoticons in comments, searching the site with highlighting of the results found, and some other site functions are not available!
Enable JavaScript in your browser settings!
You may be interested in other articles:
Memory status: In this menu item, you can check the memory status of the SIM card or device.
1 line/2 lines view: You can set the subscriber number display to be one line or two lines.
Chapter 15. Settings.
IN this interface, You can change settings such as time and date, language, call settings, etc.
You can set one of the sound profiles.
Standard/Silent/Vibration/Silent Ring/Vibration and Loud Ring.
You can Launch, Customize, or Rename each profile.
Ringtones
For each SIM card, you can set a standard or downloaded ringtone and message tone.
Volume
Calls: Set the volume for an incoming call.
Messages: You can adjust the volume for the ringtone incoming message.
Tone: You can set the speaker volume when talking.
Alarm: You can set the alarm volume as desired.
Power On/Off Sound: You can adjust the volume of the device's power on/off ringtone.
Call tone
You can select the signal type for SIM cards from six options: ring, vibration, silent, ring after vibration, and vibration and ring.
SignalSMS
You can select the type of incoming message signal for SIM cards from four options: ring, vibration, silent, and ring and vibration.
Reminder
You can select the reminder tone type: ring, vibration, silent and vibration, and ring.
Keyboard tone
You can select the keyboard tone type: silent, Melody 1 and Melody 2.
Low battery signal
You can turn the low battery alarm on or off. After enabling this function, when the battery charge drops to almost zero, you will hear sound signal warning about this.
Sound on/off
You can change the melody that plays when you turn the device on/off.
When entering this menu, You will have access to various services provided by your telecom operator.
These services are provided by the telecom operator and are not a function as such this phone. For getting additional information Contact your carrier.
· SIM settings.
Standby mode.
Home SIM: In this interface, you can configure the parameters for dialing a number from any of the SIM cards or automatically, as well as the parameters for receiving and viewing SMS messages.
Also in this menu item, you can change the name of any of the SIM cards inserted into the device.
· Network selection: When you enter a roaming zone, the network can switch automatically.
Automatic selection: The phone will automatically search for the most suitable network to connect to.
Manual selection: The phone will scan available networks for connection and you can select the network you require.
· Forwarding: When using the "Forwarding" function, you can transfer incoming call, to any other number.
All calls: All incoming calls will be transferred to the number you specified.
If busy: If, when you receive an incoming call, you are already communicating with another subscriber, the call will be transferred to the number you specified.
If there is no answer: When there is an incoming call, if the subscriber does not receive an answer, his number will be transferred to any number you specified.
If not available: If your phone is turned off or is out of network coverage, the call will be transferred to the number you specified.
Clear All: You can clear all settings of all forwarding modes.
· Ban.
For ban available:
Outgoing
Inbox
Inbox while roaming
International call
Calling in international roaming
Cancel all: Cancel all call barrings.
Change password: Through the operator you use, you can set a call barring password.
Call Waiting: You can turn this feature on or off. When you enable this feature, even if you are talking to another subscriber, the new incoming call will be answered and put on hold.
Number visibility: This function must be supported by your telecom operator.
Line selection: In this menu item you can select: Line 1 or Line 2. This function is designed to switch numbers if two numbers are registered on one SIM card. If you are using a SIM card with one registered number, be sure to set the value to Line 1, otherwise you will not receive incoming calls or messages.
On an airplane: You can set this feature to be enabled by default (the feature will be activated automatically every time you turn on the phone). When this function is enabled, all network operations such as SMS, MMS, dialing, WAP Internet will be blocked until this function is disabled.
· Other:
Beep after 50 seconds: After enabling this feature, when making a call and subsequent conversation, you will hear a beep every time 50 seconds of conversation have passed.
Connection alert: When this feature is enabled, you will feel a vibration every time the called party receives your call.
Answer/Reject Mode:
Reject, Reply via SMS: When you receive an incoming call on your phone, you have the option to 'reply via SMS'.
Any key answer: When on this function, you will be able to answer incoming call when pressing any key except the “right function” and “red”.
Auto redial: You can activate or deactivate this function. If this feature is enabled, then in case of a failed call, the number will be redialed automatically.
· Time and date: You can set the date and time on the phone, as well as the mode for displaying them on the display.
· Language: You can choose English and Russian languages.
· Do not use or store your phone in dusty or dirty environments. This can lead to failure of moving components.
· Protect your phone from exposure to high temperatures. Increased temperature reduces service life electronic devices, battery failure may cause deformation or melting of individual plastic components of the phone.
· Avoid leaving your phone in cold temperatures for long periods of time. When the phone is subsequently heated (to normal temperature), moisture may condense inside, which can cause failure electronic circuit phone.
· Do not try to open the phone case yourself. Without appropriate qualifications, you can damage its parts and components.
· Avoid dropping, bumping or shaking your phone. Rough handling may damage the internal components of the device.
· Do not use harsh chemicals, solvents or concentrated detergents to clean your phone.
· Do not paint the phone. Paint may bleed between moving parts and prevent proper operation of the unit.
All the recommendations described above apply equally to the phone, battery, charger and any other accessories. If any of these devices do not work properly, contact EXPLAY service center. Our specialists will help you and, if necessary, organize service.
Do not use a mobile phone while driving a car.
Be sure to secure the phone in the holder; Do not place the phone on a passenger seat or in a place where it could fall in the event of a collision or sudden stop.
Remember that road safety is of paramount importance!
Comply with any applicable special laws and
Be sure to turn off your phone in areas where it is prohibited from being used or where it may cause interference or danger.
Use the phone only in its normal operating positions.
The phone contains magnetic components. The phone may attract metal objects, and people with hearing aids do not need to hold the phone near their ear. Be sure to secure the phone in the holder as metal objects may be attracted to the phone, especially the speaker. Do not keep credit cards or other magnetic storage media near your phone as this may result in data loss.
Modern electronic equipment is designed to provide shielding from radio signals. However, some electronic devices may not be shielded from mobile phone radio signals.
Manufacturers of electronic pacemakers recommend keeping a mobile phone at a distance of at least 20 cm from the pacemaker to avoid the possible influence of radio emissions from the phone on the operation of the pacemaker. These recommendations are consistent with the results of independent research and the recommendations of Wireless Technology Research.
People who use an electronic pacemaker:
· Always keep the phone switched on at a distance of more than 20cm from the pacemaker.
· You should never carry your phone in your breast pocket.
· When talking, you should press the phone to the ear located further from the pacemaker to minimize the effect of radio interference.
· If you have reason to suspect interference, you must immediately turn off your phone.
Some mobile phones can be used with hearing aids. If interference occurs in this case, contact your service center for assistance.
Interference from radio transmitting equipment, including mobile phones, may interfere with the operation of improperly protected medical equipment. Consult a healthcare professional or medical device manufacturer regarding proper shielding of devices from external radio waves. Turn off your phone when entering health care buildings if there are signs prohibiting the use of cell phones. Clinics and health centers may operate equipment that is sensitive to external radio waves.
Radio signals may adversely affect the operation of improperly installed or improperly shielded vehicle electronic systems(e.g. electronic fuel injection systems, electronic anti-lock braking systems, electronic speed control systems, airbag control systems). Consult the manufacturer or its representatives regarding your vehicle. You should also obtain information from the manufacturer of any equipment installed on your vehicle.
Turn off your phone in any institution where specially installed posters require it.
Turn off your phone in areas where there is a potentially explosive atmosphere. Follow all signs and instructions. The appearance of a spark in such a place can cause an explosion or spontaneous combustion and cause injury to human flesh and death.
It is recommended to turn off your phone at gas stations (service stations). It should be recalled that restrictions on the use of electronic equipment in fuel depots (in the area of fuel storage and distribution), chemical plants or blasting sites must be observed.
Areas with a potentially explosive atmosphere are often, but not always, marked with warning signs. Among them it is necessary to note the holds of ships; plants associated with the processing and storage of chemical products; vehicles powered by liquefied gas (such as propane or butane); areas where the air contains chemicals or particles such as fibers, dust or metal powder; as well as other places,
Where there is usually a warning about the need to turn off the car engine.
Mobile phone maintenance and installation vehicles should only be performed by qualified personnel. Improper installation and maintenance may be dangerous and may void the warranty for this product.
Regularly check the correct installation and operation of telephone equipment installed on the vehicle.
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its components and accessories.
When using a vehicle equipped with an air bag, remember that the air bag inflates with great force. Do not place any objects, including installed or portable equipment mobile communications in areas above the airbag or in the area where the airbag deploys. Incorrect installation
Vehicle mobile communications equipment can cause serious injury if the air bag deploys.
The use of mobile phones on board the aircraft is prohibited. Turn off your phone before boarding a plane. Using a mobile phone on an airplane can have a dangerous effect on various systems aircraft, disrupt operation
Internal service radio networks on an aircraft and may also be illegal.
Violation of the above instructions may result in legal action and/or blocking or denial of telephone service to the violator by the operator cellular communications.
Important:
This phone, like any other mobile phone, uses a radio signal for communication, which does not guarantee a 100% signal level in any location. Therefore, you should not rely solely on your mobile phone for emergency communications (such as calling an ambulance).
Emergency calls may not be possible on some cellular networks or when using certain network services and/or phone features. For execution emergency call You may need to enable these features first. Please read this manual carefully and consult your cellular service provider.
· The guarantee is provided in accordance with the current legislation of the Russian Federation.
· The warranty is valid for 12 months from the date of sale indicated in the warranty card.
· Repairs during the warranty period are carried out at authorized service centers indicated in the warranty card.
· The warranty does not apply to damage caused by misuse or negligence. Please keep your warranty card and, if possible, the original packaging. This does not affect your statutory rights.
