Windows.  Viruses.  Notebooks.  Internet.  office.  Utilities.  Drivers

The Mini USB Router made by Xiaomi is a tiny little USB dongle which can create a Wi-Fi hotspot. The dongle sucks internet data from the PC and disperses it in the form of Wi-Fi network. You can then connect any WiFi enabled device to this network and access internet. All it needs is a free USB port on an internet-connected desktop or laptop computer.

You can also use the Mini USB Router as a Wi-Fi Adapter to connect your PC/Laptop to Wi-Fi. So, if your desktop does not have a WLAN card, you can use the Mi Mini USB Router to connect it to Wi-Fi networks. You can also use it on a laptop if its WLAN card is not functioning.

The only hard thing about setting the device is that the provided software is in Chinese. However, there's a small hack to change the language to English. That’s what we will use to set up the USB dongle for your use case – As a WiFi Hotspot or As a WiFi Adapter.

Setup as a WiFi Hotspot (Create WiFi)

Setting up the Mi Pocket WiFi for a quick hotspot is a fairly easy task. All you need to do is install the Mi WiFi software on your PC and then plug-in the USB device. You need to have internet access on the PC via either a LAN port, data card or another WiFi receiver.

You can now connect any WiFi enabled device to the network created by the Mi Pocket WiFi. You can also use other options such as block list and speed limiter.

Change Language of Software to English

There is no option to change the language, but a quick registry hack can change many options within the software to English.

Just download and run the file from THIS LINK . alternatively, open Registry Editor (regedit.exe) and browse to HKEY_LOCAL_MACHINE\SOFTWARE\XiaoMi\MiWiFi. Here, change the value for Language from c hinese to english.

Restart the software after making the changes and it will start in English.

Sharing Files with Others

You can share files with other devices connected to the WiFi network created by Mi Pocket WiFi. Just follow these simple steps:

You can also download and install the Android app to access shared files or to upload files from the phone to PC. The app also has options to remotely shut down the PC.

Setup as a WiFi Receiver (Adapter)/WLAN Card

You can also use the Mi Pocket WiFi as a WiFi enabler for your desktop or laptop PC. You will then be able to connect to nearby WiFi networks and access the internet.

If you wish to change the mode back to WiFi Hotspot, you should repeat the same steps above. Don’t forget to leave a comment if you need any additional information about setting up the Mi Pocket WiFi 🙂

USB display Adapter Driver version 1.1.328.0. If the driver driver

Provides the installation files for Fresco Logic FL2000 USB display Adapter Driver version 1.1.332.0. If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver

USB Micro Adapter Driver driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. ...

Provides the installation files for Netgear N150 WiFi USB Micro Adapter Driver version 1015.8.823.2012. If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. ...

USB 2.0 network Adapter Driver driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver

Installation files for Realtek RTL8192FU Wireless LAN 802.11n USB 2.0 network Adapter Driver version 1030.32.201.2018. If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. In order ...

Installation files for Realtek RTL8192FU Wireless LAN 802.11n USB 2.0 network Adapter Driver version 1030.32.201.2018. If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. In order ...

Installation files for Qualcomm Atheros AR9002WB-1NG Wireless Network Adapter Driver 10.0.0.260. If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. In...

Installation files for Qualcomm Atheros AR9485WB-EG Wireless Network Adapter Driver 10.0.0.260. If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. In...

Installation files for Qualcomm Atheros AR946x Wireless Network Adapter Driver 10.0.0.260. If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. In...

Installation files for Qualcomm Atheros AR956x Wireless Network Adapter Driver 10.0.0.260. If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. In...

Installation files for Qualcomm Atheros AR9485 Wireless Network Adapter Driver 10.0.0.260. If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. In...

USB WiFi Adapter-N300MA driver driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. ...

Package provides the installation files for N300 Micro USB WiFi Adapter-N300MA driver version 1015.4.1230.2011. If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. ...

Package provides the installation files for N300 Micro USB WiFi Adapter-N300MA driver version 1015.4.1230.2011. If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. ...

If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver driver

If the driver is already installed on your system, updating (overwrite-installing) ... consideration that is not recommended to install the driver on Operating Systems other than stated ones. In order to manually update your driver, follow the steps below (the next steps): 1. ...

System using Secure Boot.&&&Installation:&& 1- Uninstall the previous driver version.&2- Double-click the installation file (2018_FFD_2.exe) to proceed ... (Windows 10/ 8.1 /8)& - Start/All Programs/Thrustmaster/Force Feedback driver/Control Panel. (Windows 7/Vista)& - Your accessory ...

Today we have a portable review wifi router from Xiaomi, which is able to be both a receiver and an Internet transmitter. I have not seen his review here before. Well, let's see what this "baby" is capable of.
Tests and descriptions under the cut ...

I would like to say right away that all the links present in the review are added here not for advertising purposes, but for information! Great review!

1. Introduction

2. Characteristics

3. Appearance

4. How does it work?

5. Tests

6. Bottom line

1. Introduction

It all started with the fact that I received a promotional letter with discounts from the Banggood store in the mail, I usually do not pay much attention to such letters, quickly scrolling down their contents, but this time I came across this item, with a promising huge discount. I decided to go see what's what, what it is and why I need it. Having climbed the rest of the sites, I realized that the discount was really good, the price at that time was: $ 2.96, while in other stores the price was $ 6-8 on average. I thought for a long time why I need this thing before I buy it, because there are a lot of such things on the Internet, but Xiaomi played a role in this, it’s already better than no-name, and secondly, the router can really come in handy if you are not at home, or if something happens to the main router, but looking at the prices of ordinary routers now, it was decided to buy! The goods came quickly, nothing special, the only thing was that the packaging was an ordinary gray bag, even without a bubble wrap! At the time of my waiting for the goods, Xiaomi released a similar router, but with 8GB of memory on board!

2. Characteristics

Specifications taken from 4pda website:

Characteristics

Size: 27mm*17mm*10mm
Weight: 4g
Color: Black, White, Orange, Blue, Green, Pink
Support: Windows XP, Windows Vista 32/64bits, Windows 7 32/64bits, Windows 8 32/64bits
USB 2.0 Port: Yes
Compatible with: IEEE802.11n, IEEE802.11g, IEEE802.11b
11b:1/2/5.5/11Mbps
11g:6/9/12/18/24/36/48/54Mbps
11n:Up to 150Mbps
Support: network detection automatically
transmission rate transformation
20MHz/40MHz bandwidth: Yes
1T1R Antenna Mode: Yes
2.4G:Yes
QoS-WMM, WMM-PS: Yes
Infrastructure and Ad-hoc: Yes
Low power consumption: Yes
Power Management: Yes
Frequency range: 2.412-2.4835 GHz
Working Channel: 1-13 (China)
Transmitted power: 18 dBm (Maximum)
Insecure Use of Cryptography: WPA-PSK/WPA2-PSK,64/128bit WEP
Software Language: Chinese
Antenna: PIFA Antenna build in

environment:
Working Temperature: 0~40 degrees
Storage Temperature: -20~70 degrees
Operating Humidity: 10% ~ 90% RH No Condensation
Storage Humidity: 5% ~ 90% RH No Condensation


So let's figure it out quickly and clearly what this thing can do?
This router is for:
1. For WiFi signal transmission. Distributing a wifi network from a computer connected to the Internet, other computers, phones, tablets. In simple words like a regular wifi router.
2. To receive WiFi, that is, it can work in network card, receive wifi from other computers or routers.
It also has the ability to control a computer with android phone(computer shutdown, standby and shutdown timer, slideshow mode) and cloud storage 1tb from Kuaipan. I didn’t use the storage, I didn’t like this garbage on the phone when it was installed in the firmware, plus it’s all in Chinese and a Chinese server, so it makes no sense to go there, there are a lot of storages.

3. Appearance

Enough intrigue, let's take a closer look at him. There are 6 types of colors for this router, I took black.
He came in such a bag similar to the one in which the well-known button for smartphones was sold, how do I like these bags


instruction











included was a string so you could hang it like a keychain




for an idea of ​​\u200b\u200bsize, who can guess what the card + into karma)))


this is what it looks like on a computer



4. How does it work?

To get started with this router, we need to download and install the client on the computer. Several sources:
1. Topic on the w3bsit3-dns.com forum, there are clients translated into Russian and English (not the latest versions), also some information:
2. Official website, the latest versions, but the language is Chinese and the download speed is slow. I post the download instructions in the screenshot, you can use google translate

Jump instruction


3. English-language forum, but you need to be registered there, and leave a comment in the topic in order to download (there are English versions of the client, not the latest ones)
In the search, enter: portable wifi

I downloaded the Russian version of the client from w3bsit3-dns.com, but since the instructions say that you must first install the Chinese version, and then replace the "exe" file in the program folder, I downloaded latest version client from office site, and then replaced the "exe" file with w3bsit3-dns.com.
When installing and launching the program, it will initially require you to insert this router into the computer, then it will create a wifi network (I started it the second time) and the main window of the program will come out. This whole sequence is shown in the picture below:


After this is done, we have a new wifi network. On the 3rd picture you see its name and password, from where you can change it. The “client mode” item allows you to switch the device to the network card mode, and not distribute, but receive the Internet.
This is how the program settings window looks like, the author stated that there are flaws in the translation, but for me it is quite usable, at least more understandable than Chinese:


As we can see, there are not many settings, I am glad that there is an item to restart wifi (but you never know). You can also set color scheme window, not so important, but nice. I initially had it black, rather because of the color of the router itself. Here's what the rest of the colors look like:


But since I recently started using Ubuntu, it’s very bad that there is no client for Linux, I found some information, but since I’m not quite experienced in this, I didn’t quite figure out how to use it: (Can anyone help? I wrote to the author, waiting for an answer)

5. Tests

So we come to one of the most important points, testing.
For testing will be used: phone JiaYu G3S, tp-link router TL-WR741ND, wired Internet Alas, the speed is 5Mbps (not telephone), and of course our router is from Xiaomi.
First, let's measure the speed and quality of the Internet from my permanent Tp-link TL-WR741ND router up close:


Next, we connect our Xiaomi and test it up close too:
As you can see, it’s even a little better here))) Well, I hope you yourself understand that the tests have their own error, but we can conclude that the results are quite good!


Now we go to the end of another room and close the doors behind us (because the rooms are arranged in length, in the form of a rectangle). Here the results are already worse, the speed was cut, but the signal did not disappear and it is possible to use it in principle:


At this stage, we can say that such a baby showed pretty normal results. We go further, and then we have testing the network card mode.
We disconnect our main Tp-link router from the computer, put our Xiaomi into network card mode and we will catch a wifi network from the Tp-link router
This is how the network reception results look like:

Then we take our Internet wire, move the table to hell, the bedside table with a mirror behind which it is laid, get tangled in the wires, everything falls down and we get angry, but in the end we put our Tp-link in the middle of the next room, close the doors again and we catch a signal from Tp-link to our Xiaomi, we get the following results:

We put everything back in place and summarize.

6. Bottom line

Summing up, I want to say that this product turned out to be quite an interesting device. It will not be possible to fully replace a normal router with it, but as an alternative in any cases, or when you don’t want to spend it, it will fit perfectly. The range of the signal is certainly not great, but I think it will be enough. If necessary, I can measure the quality on 100Mbit Internet, but a little later.
Pros:
● Size (compact, can be used as a keychain)
● Quality of work (good signal results, enough to surf the Internet)
● Low price (relative to other routers)
● Xiaomi
Minuses:
● Requires a powered on computer and client to work
● No Linux support
● A full-fledged router cannot be replaced by them

I hope you liked it and I did not try in vain!

I plan to buy +77 Add to favorites Liked the review +34 +87

Wireless technologies have firmly occupied their niche and continue to develop rapidly. There is no longer a desire to scatter wires throughout the apartment, wifi technology is in almost every home. And if laptops, tablets and phones are already equipped with Wi-Fi receivers, then what to do with a desktop computer? Of course, you need to connect a Wi-Fi adapter, of which there are a great many on the market. Of course, Xiomi could not stand aside and released a long time ago Portable USB Mini WiFi adapter.

How does Xiaomi usually outperform its competitors? Affordable price and high-quality hardware, this statement did not bypass this WiFi adapter. The price of 300 rubles makes it one of the most affordable on the market, and the length of the device is less than 3 centimeters. But it is worth noting that the case is a little chubby, two parallel USB ports, it can slightly push its neighbor:

It is clearly seen that the adapter wireless mouse A4tech is noticeably smaller than the Xiaomi Wi-Fi adapter. However, both devices will work. The laptop will no longer bother anyone:

Why insert an adapter into a laptop, there is also built-in Wi-FI? The fact is that this device can also work in access point mode - receiving Internet from a computer, distributing a separate Wi-Fi network. This can be useful if, for example, you have traveled out of town and are using a 4G usb modem.

If you care about appearance, you can choose from 6 available colors:

I liked black more, less flashy, though easier to lose.

Let's see what this little guy can do:

Characteristics of Xiaomi USB Wi-Fi adapter

Manufacturer Mi
Model Xiaomi Mi WiFi USB
Frame Black, white, orange, blue, green, pink plastic
WiFi standard 802.11g, 802.11n, 802.11b
Frequency range 2.4GHz
Connection speed 150 Mbps
Transmitter power 18dBM
Antenna 1 internal non-removable
Supported OS Windows XP, Windows Vista, Windows 7, Windows 8 (Windows 10 works the same)
Dimensions 27mm x 17mm x 10mm
Working temperature 0℃-40℃ at rel. humidity 10-90%

The characteristics do not stand out for anything special, a simple budget adapter, neither 5GHz nor USB 3.0. And what can you demand for 300 rubles?

The package includes the adapter itself, a cap and a cord. The adapter cover is very easy to lose, so it's best to put it in a safe place right away.

Let's move on to connecting the adapter.

Xiaomi MI Portable USB Mini WiFi Driver

For most competitors, drivers are pulled from the center Windows updates and are installed automatically, but Xiaomi needs to find and install drivers on its own. Bold minus the manufacturer for this! Also original program on Chinese, but we already know that Xiaomi software is far from perfect, and some jambs have to be overcome. And in this case, not everything is so complicated, let's download the Russified version of the drivers and applications for Windows.

Let's move on to the installation, run .exe file and click the "Install" button.

After installation, the program icon appears in the tray, and a notification about the need to connect the adapter to the computer.

If, after connecting the adapter, the message "Unable to connect" appears, you need to press right click click on the application icon and select "Restart Wi-FI", after that the device should work. By default, the Wi-Fi distribution mode is turned on, to change it to the receive mode, we also right-click on the application and select the "Client Mode" item. Perhaps we will consider it first.

Client mode

In client mode, your computer has the ability to connect to WiFi networks. There is nothing tricky here, as well as there are no additional settings. If suddenly your router distributes a 5GHz signal, then the adapter will not find your WiFi network. Mi Portable Wi-Fi will only work with a computer, if you plug it into a TV, you won't be able to set it up.

The speed measurements will be lower, but for now let's switch to the access point mode by pressing the only available button.

Access point mode

In access point mode, more functionality is available. In the main settings window, you can select the name and security of the network to be created, as well as additional properties. The color of the interface can also be changed to one of the 6 available colors.

It is also possible to manage already connected devices. You can set a speed limit on the device, or ban. You can also allow the device to manage the WiFi adapter. This is necessary to provide some additional functionality.

The application is completely in Russian, divided into 3 pages by function:

All functions work fine, but only a network drive will be in demand.

MI Portable USB Mini WiFi Speed ​​Test

I, like many in Russia, have a speed limit of 100 Mbps from the provider. And yes, there is a limitation tariff plan(I have 60 Mbps). But I'm interested in speed stability, so I watched the download of a torrent file weighing about 8 GB. It took about 30 minutes at an average speed of 4.2 MB/s. I hope everyone remembers the difference between a megabit and a megabyte.

During loading, there were slight fluctuations in speed, but no critical drops were detected:

The stability of wi-fi speed is highly dependent on the conditions in which the device is operated. Distance and obstacles to the router, number WiFi networks neighbors - noticeably distort the performance. According to personal observations, while surfing the Internet and watching movies online, I did not notice the difference between the cable and the Xiaomi adapter.

Increasing the speed of Xiaomi Mi Portable

There are some software limitations at the driver level. If you do not have enough adapter speed, then this restriction can be removed. To do this, go to Device Manager, to do this, right-click on the "This PC" icon and go to the "Device Manager" tab. Find Xiaomi Wireless Adapter in the list network adapters and go to properties. In the additional parameters there is an item "Multimedia / Game environment", it must be enabled.

Even if you don’t need an adapter specifically, you can order it as a load for other equipment. It can come in handy at any time, for example, as an IT specialist, I often have to share Wi-Fi from my phone and connect users' PCs. In general, the device is not bad, it is worth taking a closer look.

Another small but very proud device that you cannot do without if you want to connect your desktop computer To wireless internet. Xiaomi WiFi adapter - also called Mi Portable - competes with the most inexpensive devices of this type, while providing a little more options than others.

What does Xiaomi wifi adapter look like?

Xiaomi releases several wifi models adapters, a characteristic feature of which is the presence of built-in flash memory of various sizes. On the test, we had the most budget option, which we purchased in a well-known store.

It is slightly larger than a ruble coin in size, due to which it will not interfere with parts protruding from the USB port of a computer or laptop. Our copy of the signature white color, although there is a whole palette for sale.


The delivery set is also very budgetary - this is a small packaging bag, a plug on USB port and lace.

The adapter supports 2.4 GHz, Wi-Fi 802.11N, up to 150 Mb/s - this is the most First level, but it is enough for everyday work with the Internet.

Xiaomi WiFi adapter installation and hotspot mode

In order to fully use the device, I needed to do some work to find drivers and software. This is due to the fact that Xiaomi Mi WiFi Adapter is made exclusively for the domestic market and all programs for it are in Chinese. But of course, the skilled programmers have already managed to work and translated some of them into Russian, some into English languages. I have collected them in a separate archive, which you need to download from our repository, and now I will tell you how to install all this economy correctly.

First of all, install the file “1-miwifi_setup_2.3.759.exe” on the computer - this is the Chinese original program with drivers. Then we copy to the folder where the program was installed, the two remaining files "MiWiFi.exe" and "uninstall.exe" and the folder "kuaipan" - and replace the originals with them. These are substitutes for the standard package translated into an understandable language. We launch the installed MiWiFi program - it will ask you to insert the adapter into the PC.

We connect the adapter to the USB connector of the computer - it is automatically recognized and starts working in access point mode, generating a network SSID and a password for connection.


After connecting to this point of the smartphone, a new window informing about this opened, and the number “1” appeared in the main window of the program by the number of connected devices.

If you click on this number, a list of connections will open and the ability to manage them - limit the speed or ban.

There are three main menu items in the main program window - let's take a closer look at them. The first is a call to the same netlist, so we'll skip it.

The second one is launch cloud service Kuaipan, with which you can exchange files over the Internet between gadgets and computers.


Here, 105 gigs of cloud storage space for documents is immediately available for download without registration.

In principle, this is more than enough for everyday needs, but it is even better to start account, then the place will immediately increase to 1 terabyte. To do this, go to the “Not Login” menu, the “Sync Settings” section.

After that, the program changes color to green - now you can upload files here and then download them when you log in to the service on another computer.

If the MiWiFi program is not installed on another computer, then you can enter the service through the site kuaipan.cn - a site in Chinese, through the translator plugin in the browser we translate into Russian. Here, either again we go through the account on Kuaipan, or, like me, we select authorization through Xiaomi at the bottom of the list.

We get into our account, where we find the downloaded files. Here you can delete, rename or share them.

The third item in the form of a folder is file sharing inside home network using the flash memory built into the adapter. Upload the file here, after which it will appear in the list.

Now, to download it from another computer, click on the link "How to open a disk?". For access from a PC or laptop, a link to the IP address will be issued. For downloading from a smartphone or tablet - QR code. In my opinion, a very cool solution for those who need to transfer files from one computer to another via WiFi, but do not know how to share folders on the computers themselves.

WiFi adapter mode Xiaomi, or client

Now let's try to switch the Mi Pocket Adapter to the mode of receiving a signal to the computer from the router. To do this, select "Client Mode" in the menu

After reboot, choose standard application windows point access, connect and the information appears in the program window.

Xiaomi USB adapter speed tests

In terms of speed, we did not expect anything special - after all, the device is budget and specifications do not shine. But at the same time, the adapter copes with its tasks perfectly and, surprisingly, does not squander the speed of the Internet.


If you notice an error, select a piece of text and press Ctrl + Enter
SHARE: