IN iPhone 5S a 4-inch Retina display is installed, the oleophobic coating of which does not leave fingerprints, and Gorilla Glass protects the screen from minor scratches and chips. However, no matter how hard the manufacturer tries, the glass iPhone 5S everything is also prone to scratches and with careless use it can be broken.
Fortunately, the design of the new phone makes it easy to replace the screen without any special skills. Follow our instructions and you will succeed.
And so, let's get started. We will need:
- a special Pentalobe screwdriver;
- a set of tools for safe disassembly of the case;
- a set of small Phillips screwdrivers;
- new screen for iPhone 5S.
Step 1.
Turn off your phone and use a paperclip to remove the SIM card.
Step 2.
Using a Pentaglobe screwdriver, remove the 2 screws from the bottom of the machine.
Step 3.
Pry up the LCD screen with the special metal tool from the kit. Run the plastic picks along the antenna to release any fasteners along the screen.
ATTENTION: When performing this operation, be extremely careful and try not to damage the internal loops.
Step 4.
Disconnect the fingerprint sensor and Lighthing connector cables.
Step 5.
Using a Phillips screwdriver, remove the 4 screws securing the metal plate that covers the display connector.
Step 6.
Disconnect the 3 connectors using the special tool for safe disassembly and remove the display.
Step 7.
Unscrew the 3 screws on the metal insert that covers the speaker and disconnect the speaker itself. Using a special tool for safe disassembly, disconnect the cable for the light sensor, front camera and microphone.
Step 8.
Unscrew the 3 screws on the metal plate near the home button and remove the button itself along with the cable. Using Phillips screwdrivers, unscrew the 4 screws and remove the display's protective thermoplate.
Step 9.
Install the Display Protector and Home Button on the New Screen iPhone 5S.
Step 10.
Connect the cables for the ambient light sensor, front camera, microphone and speaker back to the metal insert of the LCD.
Step 11.
Connect the remaining 3 connectors to motherboard and fix the metal plate with 4 screws.
Step 12.
Connect the fingerprint sensor cable.
Step 13.
Put the LCD screen back, make sure. that all fasteners are firmly fixed.
Step 14.
Use a Pentaglobe screwdriver to tighten the 2 screws on the bottom of the machine.
Step 15.
Insert a SIM card and turn on your phone.
All! Did you manage to replace the screen in a new one yourself? iPhone 5S.
More detailed instructions available on video:
Selling a broken iPhone to us means earning a decent amount of money on a non-working device. We extract the maximum benefit from the purchased device:
No other broken iPhone dealer will offer you such a convenient package of services that is included with every deal:
You will not find a better place than our service center where you can sell a non-working iPhone and at the same time earn a decent cash reward for the transaction.
If you are the owner of mobile equipment from a company from Cupertino, but have broken or damaged it and do not want to get involved in repairs, then simply sell this product within our service center. We will buy your phone at the highest price.
It's no secret that one of the most common iPhone breakdowns is a broken screen. No matter how Apple assures us otherwise, the displays modern smartphones no stronger than the iPhone, which were released a few years ago. Therefore, leaving the cafe on Friday evening and dropping your favorite phone on the pavement, you will most likely find cracks on the screen.
We strongly recommend using, but damage is often unavoidable. It's one thing when this happens to an iPhone 6 or older - repairs there won't be as expensive. True, in this case it is also necessary to determine whether only the glass or the display module itself is damaged. But what if the screen is broken on the iPhone X, iPhone XS or? Indeed, due to the fact that they have an OLED screen installed, repair work is considered much more complicated. And expensive - often worth as good android smartphone.
IN service center Apple Pro found a way out of this situation - they change the damaged display to their own restored one. This is an original part (not Chinese fakes for 10,000 rubles), on which the engineers did a good job so that the restored screen served no less. At the same time, it will cost much cheaper than a new module.
Only a qualified service center engineer can determine the exact nature of the breakdown. For example, the glass on the iPhone is broken, but the touchscreen continues to work - in this case it will help. Or vice versa, touch screen does not work and there is not a scratch on the screen. Design iPhone display X, iPhone XS and iPhone XS Max allows you to change the glass or touchscreen separately - that is, you can do work like replacing just glass, as well as replacing glass with a touchscreen, which is impossible on the iPhone of earlier generations.
After removing the display module, the engineer performs the necessary checks that reveal defects. For example, after a fall, there may be no visible damage on it, and in fact the module will be faulty. Not only the state of the screen is tested, but also the touchscreen.
Then a film is glued onto the screen and the module is placed on a vacuum separator.
With the help of tools, he dismantles the old display frame and the old glass.
In the next step, the engineer cleans the display surface. Work should be done very carefully, since OLED screens are much thinner than their "LCD" brothers. One wrong move and the display will be damaged - therefore, such repairs should be entrusted only to qualified specialists.
In a special dust-free room, an engineer cleans the display module and prepares new glass. An OCA film is glued to the latter, after which the display module and glass are glued together.
Bonding and lamination takes place in automatic mode, at the output, the engineer receives a one-piece display module.
Something is missing? Right, new framework! In order for the frame and module to become one again, the engineer uses glue and a press.
When the assembly work has been completed, and the module has been tested on the tester, it can be installed on the iPhone.
But what if after the fall the matrix was damaged, but the glass remained intact? Only replacing the entire display module will help here - as is the case with this iPhone. And to make repairs cheaper, Apple Pro itself restores displays and installs them.
Important point- after installing a new module, you need to restore the True Tone function. You must have noticed that given function greatly simplifies the use of the phone in different lighting conditions, and the eyes are less tired. Brightness control information is stored in the iPhone screen controller and it must be synchronized with the data on the device itself, therefore, in order to restore True Tone, a programmer is indispensable here.
Then the engineer carefully connects all the cables and the battery back, and also installs a special moisture-proof rubber sizing. This is a special layer between the case and the glass, which protects against unwanted ingress of liquid.
Another diagnostic - everything works, including True Tone, as evidenced by the corresponding item in the settings.
Because the given type repair is considered one of the most difficult, in this case it is better to contact qualified engineers. And is carried out in a similar way. The Apple Pro service center is distinguished by a quality approach to repair Apple technology(and here it helps to save), provides a guarantee for the work performed and - plus gives a nice 10% discount for all readers of the site.
By the way, if you don’t have the opportunity to contact the Apple Pro service center to replace the display, you can do it yourself - there are both original refurbished displays and completely factory ones.
iPhone is one of the most popular smartphones of our time. It's thin, light, feature-packed, and has a good camera. But at the same time there is one significant disadvantage - a noticeable vulnerability to mechanical damage.
In the absence of a protective glass and a case, the screen can break in a matter of minutes from the slightest drop or blow. Therefore, the protection of such a gadget with accessories is mandatory. But what if the smartphone has already been broken?
Often, screen replacement is carried out along with the replacement of the display, since the manufacturer initially connects the two structures with special glue. At the same time, there are specialists who undertake such complex operations, but after that it is almost impossible to guarantee the high-quality operation of the gadget.
The main signs that your display needs to be replaced are:
Breakage of this kind is a common occurrence among those who like to drop phones. Broken glass is caused by falls and bumps.
All gadgets from the Apple brand are serviced in special service centers. This is because professional equipment is needed to repair such complex systems. Also, before parsing the gadget, it is necessary to conduct a full system test to determine the presence of malfunctions.
Most users think that replacing the display module is easy at home, but this is not at all the case. For a complete and safe replacement, high-quality original parts are required, as well as a whole set of special tools. You can buy all the things you need for this, but their price will be noticeably more expensive than servicing at a service center.
When the work is done by our masters, you get a guarantee. Our Total Apple service center offers repair services for iPhones of any models in Moscow at the most affordable prices. During the replacement process, only original parts are used, and there is also a delivery service throughout the capital.
Together with the site begins a special project.
We will be making issues dedicated to the most popular types of Apple repair. We will talk about which spare parts are better to choose - how they differ from each other, how the repair itself goes, how much it will cost you, and, perhaps most importantly, what can be done to avoid going to a service center. The result is a kind of FAQ and answers from Apple repair experts.
Today we will answer the most popular questions related to iPhone display replacement.
If cracks and chips appear on the iPhone screen, first of all, you should try to protect yourself - top part The display module is made of glass. It sounds funny, but we often have clients come in who keep up with a short time before visiting the service, cut your fingers on a broken device. If you do not have a protective film installed, we recommend that you seal the broken glass with transparent tape, this will protect your fingers and also protect against liquid getting inside the device, because if this happens, it will not only be necessary to repair the screen.
- completely original spare part (removed from another device);
– a spare part made from original components;
It is important to understand that Apple does not supply parts for open sale, therefore, a completely original spare part is taken from another device (at best, from a new one). Finding such "originals" is quite difficult. Spare parts made from original components are as close as possible in quality to the original. Only a person who is versed in the intricacies of "apple" repair can distinguish such a spare part from a factory one. The display module belonging to this category will have an original matrix and touchscreen, which guarantees high quality Images.
A copy is a spare part of low or medium quality, consisting of non-original components. The copy is visible to the naked eye. It is not difficult to distinguish such modules - a simple example would be the quality of the picture: slightly distorted colors give themselves away - less or more saturated, white, for example, when viewed at a slight angle turns into a little more blue.
1) Glass, most likely, will gradually peel off and bulge out of the device case:
2) In the process of replacing glass, dust can get on the matrix and stay there forever;
3) There is always a chance to damage the matrix or touchscreen in the process of removing the old glass, and then you will have to replace the entire module.
Keep in mind - according to our statistics, only 50 percent iPhone- the rest may have a broken matrix or damaged touchscreen from a strong blow, or there is already a non-original display. Replacing the display assembly, of course, is more expensive, but the quality and performance are guaranteed.
Why does glass peel off? When the case is deformed, a gap is formed due to the delamination of the glass from the display frame. The frame is made of plastic that can take the shape of the body, while glass does not have such properties. If this still happened, contact the service, you need to try to straighten the case or change it.
There is a lot of advice here - starting from the simplest ones like “be careful” and ending with hardcore cases that will allow your iPhone to play almost football. We recommend installing protective glass with a hardness of 9H, because cheap analogues can sometimes burst for no reason.
That's all for today - stay tuned!
Do not forget that for all readers the site 10% discount applies for all types of repairs in the ModMac.ru service center.