CD/DVDs are among the most popular external media information, but working with them in practice is not always convenient, and there are many reasons for this. These disks must be inserted into the drive and data exchange with them is noticeably slower than with hard drive. As a result, running the program from the CD will take noticeably more time. CD / DVD-disks stop being read if bad sectors or a lot of scratches appear on them, and this will happen sooner or later during their active use. For mobile users, another difficulty arises - when going on a business trip, they have to take with them the entire set of disks that may be required for work, which is also unpleasant, since it increases the size of luggage. To avoid similar problems it is possible by copying information from CDs to the hard drive, but this option It won't work for every program. For example, discs with games, licensed databases, tutorials, audio discs, etc. when copying them to a hard drive, they often refuse to work. In such cases, you will have to take a different path - create virtual CD / DVD drives on your computer and place images of frequently used disks in them. Technically, this involves performing two operations. First you need to create the necessary disk image files (that is, virtual CDs) - this can be done using programs for burning and copying CD-DVDs (such as, for example, Nero Burning ROM) and save these images to your hard drive. And then you will have to use a special virtual drive emulator program, with which you will need to create the required number of virtual CD / DVD drives and connect a prepared disk image in each of them. As a result, it will be possible to work with virtual CDs in the same way as with real ones. Moreover, it will be much faster and more reliable. Why? Everything is very simple. On the one hand, access to information will be accelerated, since hard drive it will read much faster than from a CD, and you don't have to insert a real disk into a physical drive to run a virtual disk. On the other hand, the probability of losing valuable data as a result of disc failure will decrease, because the CD / DVD discs themselves are not inserted into the drive, and therefore their surface does not wear out. Moreover, it will be possible to work with several disks at the same time.
And then sequentially for each of the drives mount virtual disk, by simply specifying the corresponding image files on the hard disk for them (Virtual CD/DVD-ROM > "Drive…" > "Mount Image" command). To remove an image from a virtual drive, you will need the Unmount Image command.
The technology of working with DAEMON Tools Pro is somewhat more complicated. The window of this utility is implemented in the form of three panels - the information panel and two windows: the image window and the drive window. The Images window is designed to perform various operations on images, while the Drives window allows you to manage physical and virtual CD/DVD devices.
The first step in DAEMON Tools Pro is to create a collection of images. If the images were created earlier and you have not yet managed to forget in which particular folder on the disk they are located, then you need to click on the "Add images" button and immediately place them in the collection. If you do not remember where they are, you will have to use the mode automatic search(button "Search images").
If there are no images on the disk yet, then you need to create them. To do this, insert the coveted disc into the CD / DVD-ROM, click on the "Create Image" button, select the appropriate physical drive (it is clear if there are several drives) and, if necessary, change the settings for reading the disc on the "Drive" tab. And then on the "Image Catalog" tab, enter the name of the image and indicate the output format, after which they click on the "Start" button and after a couple of minutes they get the desired image.
After the collection is filled with images in one way or another, the required number of virtual drives is installed by clicking the "Add SCSI Virtual Drive" button the corresponding number of times - the connected drives appear in the program's virtual drives window. It should be noted that one virtual drive is created automatically during the installation of the program.
Then, a virtual image is installed on each of the virtual CD/DVD devices. To perform such an installation, activate the first image and use the "Mount image" command from the context menu, followed by specifying the desired virtual drive. After that, a similar operation will need to be carried out with all other images. If you need to remove an image from a virtual drive, use the "Unmount" command from the context menu.
Emulating virtual CD / DVD drives in Alcohol 120% and Alcohol 52% requires three steps. At the first, a collection of images is formed. If the images already exist, then they can be connected directly by simply right-clicking in a free area of the browser window, calling the "Add images" command from the context menu and specifying the necessary images. Well, if you don't remember exactly where the images are located on the disk, then you can use the search for images ("Search for images" operation in the "Basic operations" group), and only then connect the images.
If the image files do not exist on disk, they will have to be created. It is not difficult to do this in Alcohol 120% (or Alcohol 52%). To do this, just activate the "Create images" operation, select a physical drive (only if there are several drives), determine the data type and, if necessary, adjust the disk reading settings, and on the next screen enter the image name and click the "Start" button.
After the collection of images is formed, virtual drives are connected - the "Virtual disk" operation from the "Settings" group is responsible for this, after launching which you will need to determine the required number of virtual drives. You can also enable/disable the checkboxes "Remount images on system reboot" and "Mount image on Device 0 on double click". Enabling the first checkbox will ensure that virtual disks remain in their virtual drives after restarting or shutting down the computer. Enabling the second one will allow you to mount the image file by double-clicking on it to the first free virtual drive. After that, it will still be necessary to activate the "File Associations" subsection and mark those image file extensions that are supposed to be mounted into virtual devices. The result of these manipulations will be the appearance in the lower right subwindow of the program, in addition to physical CD / DVD devices, a list of virtual drives that have appeared. By the way, it is worth noting right away that one virtual drive can be created already during the installation of the program, unless, of course, you uncheck the corresponding box during installation.
Well, now it remains only to mount virtual CDs on virtual devices using the "Mount to device" command from the context menu. You can mount the image faster - just by double-clicking on it, however, this is only on the condition that the "Mount image to Device 0 on double-click" checkbox was not disabled when connecting virtual drives. To remove an image from a virtual drive, use the "Unmount Image" command.
The CD Management module provides virtual CD and image management.
In Virtual CD, it is more difficult to deal with the options responsible for creating a collection, since they are scattered across different modules, and the total number of various settings is large. If we are talking about adding existing image files to the collection, then this can be done both through the Toolbox module and through the CD Management module. In the first case, open the Main Tasks in Virtual CD tab and launch the Find Virtual CDs automatic image search function.
In the second, the Add command is called from the context menu and specific images from the folder are specified.
You can also add a new virtual drive in two ways - using the Add/Remove Virtual Drives command, activating it from the system tray, or in the CD Management module, by calling the Drive Editor command from the context menu. In both cases, a dialog box for selecting devices opens, where you should enable additional drives. By the way, if no more than four drives are required, then these operations will not have to be carried out, since by default the program automatically adds four virtual drives to the system during its installation.
Mounting virtual CDs is easier, since it is done by simply dragging the image onto the drive in the CD Management window, or by placing a virtual CD on the drive via the system tray. The Eject command is responsible for removing an image from a virtual drive.
It should be noted that many operations in Virtual CD require sequential opening of many windows (and this slows down the process) - you can speed up the work by assigning a number of actions to hot keys, as well as actively using system tray commands, duplicating basic operations Toolbox and CD Management modules.
Modern information Technology impossible to imagine without virtualization. The fashion for creating electronic digital copies has reached its maximum: everything is digitized, from natural phenomena to living beings. The computer components themselves were not left without attention: a virtual disk, a virtual audio cable - all this has long become commonplace and familiar. Many in their daily work even face virtual computer implemented by VMware applications, Virtual Box, etc.
Despite this, for the bulk of users, CD-ROM drive emulator programs are the most popular. There used to be quite a lot of them: Virtual Emulator from Paragon, Virtual Drive, Alcohol 120% and Daemon Tools. At present, it can be argued that the invisible confrontation has won the Daemon Tools (DT) emulation application. But all good things have a downside, so it’s quite understandable that novice users began to have the question “how to disable a virtual disk”.
When DT is installed, it creates a virtual drive in the operating system and assigns it a drive letter. Further, everything is simple: through we insert into and work with the image, as with a regular compact. Everything seems to be clear. But very often, newbies unknowingly create extra virtual drives in the system and start looking for an answer on how to delete a virtual drive. This does not affect the performance in any way, but if a hardware drive is installed on several logical partitions, and here a few more virtual ones are added, it’s time to get lost.
There are several ways to solve this problem. We will consider them, along the way answering the question "how to delete a virtual disk." The easiest way is to use the tools of the program itself that created such a disk. In our case, this is DT.
Click the Start button and look for Daemon Tools in the list. We launch the application. The main window of the program appears, divided into two: at the top is a catalog of images, and at the bottom are the created virtual drives. Click to select the extra, press the right mouse button. How to delete virtual disk here? Very simple! In the menu that appears, there is an option to "Remove Drive". That's all.
The second option differs in the choice of menu item. We follow in "Parameters". In the drop-down list "Drive letter" select "Not installed".
The third option to help you understand how to delete a virtual disk in Daemon Tools. Select the extra one by clicking the left mouse button and click the icon with the image of the drive and the red cross (a hint appears - "Delete virtual drive"). Repeat the steps for all extra devices. You can remove everything. It's just as easy to add them later.
If for some reason it is impossible to use the program tools, then you can also delete the virtual disk using the tools of the Windows system. We right-click the properties of the icon "My Computer" of the desktop. In its absence, follow the "Start" - "My Computer" - "Properties". Next, on the left, select the link in the "Device Manager". Open the list of drives and select "Properties - Disable" on the virtual drive (do not confuse it with a physical device). You can return everything at any time by clicking "Activate".
Similar variant:
Select the properties of "My Computer" and follow the item "Management". Here in storage devices we are looking for the ability to manage disks. We call the menu (right button) of the virtual drive and follow the "properties". Next, the "Driver" tab and the "Disable" button. It's that simple.
As has been repeatedly pointed out, with the above methods of shutdown, you can (if necessary) very quickly return everything back. But if you completely uninstall from the DT operating system, then the virtual disk will disappear forever (until the program is reinstalled).
Today when Computer techologies have become an integral part of our lives, many users are faced with the concept of "virtual drive". Some simply do not understand what it is, how to use it. Others, on the contrary, actively use them to achieve a variety of goals and solve problems. Perhaps that is why it is worth considering the basic concepts associated with such virtual devices.
Unfortunately, many people who use computers often completely misunderstand the meaning of this term. The fact is that you should not confuse the concept of a virtual drive and a virtual disk. A virtual drive is analogous to a CD/DVD-ROM device, while a virtual disk is a copy of a hard disk (hard drive).
Virtual devices themselves are good because they keep information unchanged, because it is clear that optical discs over time, they can wear out, scratches appear on them, which is why they become unusable. Information from such a carrier is then either read partially and with errors, or not read at all.
In addition, one of the most famous areas where virtual drives are used are games that constantly require the presence of the original disk either to start games or to fully function. gameplay and maximum access to all functions and settings. Any gamer will confirm this. Now it’s worth figuring out how to create a virtual drive so that it works correctly on any computer system.
As it is already clear, physically simulating a virtual drive simply will not work. All such operations are carried out exclusively programmatically. IN this case a new device is created in this way. But even after that, it will work exactly like its "iron" counterpart (or even faster).
There are quite a lot of software products for emulating optical drives in the modern computer world. The most famous applications for working with almost all types of optical drives include such well-known and popular products as Virtual CloneDrive, Nero Burning ROM, Alcohol 120%, Daemon Tools, UltraISO, etc. Let's dwell on the last two in more detail.
These two software packages are perhaps the simplest and most feature-rich. The question of how to create a virtual drive in both utilities has almost the same solution. The difference is only in the commands or buttons used.
So, in the UltraISO application, a drive is created from a pre-created disk image. First you need to use the option " Virtual drive”, which is located in the menu “Options” / “Settings”. Here the required number of drives is set, you never know how many of them may be needed.
Then, having closed the settings, you need to go to the "Tools" menu, where the "Mount to virtual drive ..." command is located. But it is better to use the F6 function key. We select the drive with the desired letter, and in the window below we set the location of the image file. Now click the "Mount" button.
The drive will appear in the system.
Daemon Tools creates a virtual drive in the same way. Only here the “Virtual CD / DVD-ROM” command is used, called by right-clicking on the program icon in the System Tray, where the “Set the number of drives ...” item is selected, after which the “Mount image ...” command is set in the links to empty drives that appear. Then, as usual, a pre-created optical media image is selected.
Actually, in both programs last action and allows you to write an image to a virtual drive by selecting it from a hard drive or any removable media.
As you can see, creating a virtual drive is quite simple. As it is already clear, for this you need only the necessary software and a little patience. In principle, you can use the above programs, but this is not a dogma. Each user chooses which software package to use for these operations, and which program will be the most convenient and suitable for him. But we can say right away that almost all applications of this type work using the same principles. The difference can only be in the functional set.
Instruction
In order to mount disks, your computer must have a virtual drive. Virtual drives are created using special programs. Any emulator allows you to mount CD and DVD disk images. But Alcohol and Daemon Tools hold the leading positions quite firmly.
First, the process of mounting images using Alcohol will be considered. Download one of its new versions and install on HDD computer. Restart your PC after installation. Run the program.
In the "Basic operations" section, select "Search for images". Then click on the disk partition where the image is saved and click "Search". After the operation is completed, click on desired image right-click and select "Add Files to Alcohol". If necessary, you can select several files at once.
Return to the main menu of the program. There is now a list of images that you have added. Right-click on the desired image and select "Mount to Device". After a few seconds, the image will be mounted.
The second program that will be discussed is called Daemon Tools Lite. Download it and install it on your computer. When installing, be sure to check the box " Free license". Restart your computer. Launch the application.
In the main menu, click on the leftmost disk icon. Specify the path to the image. Click on it with the left mouse button, and then select "Open". Now the disk image has been added to the main menu of the program.
Right-click on the disk image. Hover over the "Mount" command and select a virtual drive (it will be automatically created by the program). Wait a few seconds. The image will be mounted. The autorun disk you mounted will open. All virtual drives created by programs are located in My Computer.
Creating an image of a disk assumes that this image will be used in the operating system as a storage medium. A disk image is an exact copy of a disk. But the disk image consists of only one file, it is somewhat similar in structure to an archive. In order to install a disk image, you must use a specialized program that was used to create the disk. You can also use another program for mounting images, of which there are a sufficient number.
You will need
Instruction
In the opened context menu select Virtual CD / DVD-ROM - then click Mount image - in the window that opens, search for the disk image file - then click the "OK" button.
There are games that burn on multiple discs. If you have such a game, there is no need to create several virtual drives at once. One drive will suffice. After installing the first disk, the installer will ask you to specify the path to another disk. In this case, you need to remove the first disk (the "Unmount drive" command), and then specify the path to the next disk. In the installer, click the "OK" button.
After installing the video game, feel free to close the Daemon Tools program, after agreeing to the request to save the emulation properties when exiting the program.
Sources:
With today's opportunities to download anything and everything from the Internet, many people now prefer not to go to the store for games, but to buy them either in digital version in the form of a distribution kit, or in a standard package, but through an online store. Or a very simple way, download the game from any file sharing service. As a rule, games on these sites are stored in the form of archives or even more often in images of the format: ISO, MDF. Today we will talk about how to mount the image of the game.
You will need
Instruction
We launch the installation program, and carefully follow the steps. Ultimately, the success of the entire operation depends on this.
Open the "computer" tab and see that a new one has been added. We will mount the image of our game on it. In our case, this will be the drive under the letter: (F). Letter designation, can be anything. It all depends on the amount of removable and physical media installed on your computer.
Specify the path to the folder with the image, select it with one click and click on the "open" button. Then a few seconds of waiting pass, and the menu of your favorite game appears on the screen of your monitor.
Related videos
After many years of practice using operating systems, it was found that the most successful option for installing a system on a computer is to create boot disk. Such a disk should contain files not only of the system itself, but also application programs to be used every day. The so-called universal disk is the prototype of a conventional boot disk.
You will need
Instruction
To create a boot disk, you must click the Start button. After the creation of the boot disk is completed, a message about the successful operation will appear on the screen.
Now you need to specify the path to installation files your system, or skip this step. After the performed operations, it is necessary to burn the created disk image to any medium (USB, CD, DVD). When automatically launching a disk image that has been written to any media, you will see a window. The title of the window will be Almeza Multiset. The window will contain a menu of two items:
- Install all programs (installation of all programs);
- Select programs manually (manual selection of programs).
You just have to select the appropriate item and click on the "OK" button.
Related videos
No matter how hard the developers computer games protect your creations from illegal copying and distribution, every day new pirated copies of games appear on the Internet. Sometimes such releases appear even before the release official version. There are two options for the content that you are offered to download. This is either an already installed game or program that is ready to use, or a disk image containing this game.
You will need
Instruction
To date, there are many programs with which you can open disk images with them. And every day their number is constantly growing. It's about not only about game images. It can be all sorts of programs or archives. Leaders in the field of similar software are programs Alcohol 120% and Deamon Tools.
Install the Alcohol 120% program for yourself. When choosing programs, pay attention to the characteristics of your operating system. The fact is that programs designed to work with a 32-bit system will not be able to install correctly on a 64-bit system. Run the program. Find the "Image Search" item located in the left column and run it. Specify the folder where the required image with the game is located. After the program finds the desired file, right-click on it and select "Add".
Then open the main menu of the program. You will see the image name among the available files. Right-click on it and select "Mount to Device". Specify one of the suggested virtual DVD drives.
If you decide to use the Deamon Tools program, install it on your computer. If you do not need to create images, and your goal is only to read ready-made files, then it is recommended to use the Deamon Tools Lite version of the program. Restart your computer, allowing the program to create virtual devices. Launch Deamon Tools and open the icon located in the system tray in the lower right corner of the screen. Search for the image for the "Add" icon, which looks like a drive with a "+" sign, and locate the folder containing the required file. After adding it to the image directory, right-click on it and select "Mount".
Related videos
Among the variety of file formats, it is impossible not to single out disk image formats. What is it and why are they so named? A disk image is its exact copy, which serves to preserve the functionality of the original. Sometimes creating images is extremely important, for example, you have a rare disc in your collection.
You will need
Instruction
The disk image is created for permanent use. The so-called virtual disk is mounted in a virtual drive. The disk image and virtual drive were invented based on real disks. Several programs have been developed to create and manage disk images. Recently, the number of such programs has increased significantly, but there are a couple of programs that faithfully serve hundreds of thousands of personal computer users.
The first program that can be considered as the main application for working with virtual drives is Daemon Tools. The program itself is a kind of emulator for virtual disks. This utility with almost all formats of created images. After installing the program, it must be launched by double-clicking the lightning icon with the left mouse button.
The program does not have a main window, all control is carried out through the context menu of the program icon, which is located in the tray (next to the clock). To open the context menu of the program, right-click on the icon and select Virtual CD/DVD-ROM. In the additional menu that opens, you will see the line Device [virtual drive name] No media".
To load the image into the virtual drive, click Mount image and specify the path to the folder with the disk image, then select the image file and click the "Open" button. To free the virtual drive from the mounted image, click Unmount image.
The Alcohol 120% program works on the same principle, and the range of tasks performed by these programs is the same. The only difference is the presence of a graphics window in the Alcohol program. The lower part of the main window contains the names of drives installed in the system, as well as virtual drives, i.e. created by the program.
To load an image into a virtual drive, use the context menu of any of the existing virtual drives (right-click on the drive). From the list that opens, select the "Mount image" command and in the "Explorer" window specify the path to the file. Unloading a disk from the drive is done using the context menu and the Unmount Image command.
Related videos
In order to be able to run some programs and applications before entering operating system, recommend creating an autoload disk. To write it, several nuances must be taken into account.
You will need
Instruction
First, learn how to burn disc images to DVD media. This is the easiest method. For its implementation, you can use many programs. As an example, download and install the popular disc burning manager Nero Burning ROM.
Run Nero.exe. A program window will appear on the screen with the title " New project". Select the type of disc installed in the drive, for example, DVD. Select DVD-ROM (Boot). Explore right menu the opened window.
Highlight the Image File option. Click the Browse button and select the disk image file you want to burn. Please note that after burning, the disk will not display the image, but the files stored in its archive.
After selecting the desired file, click the "New" button. Add if necessary additional files and programs. Pay attention to the following nuance: in DOS mode, only those programs and utilities that were specially created for this will be able to run.
Click the "Burn" button located on the main toolbar of the program to go to the detailed settings for the future disk. In the "Record" tab, set the required disc burning speed. If you plan to use this autoloading disk with other computers or laptops, then do not set the maximum write speed. This may result in incorrect reading of some files.
In some cases, you need to activate the "Finalize Disc" function to successfully work with it. Turn this feature on. To start the process of burning files, click the "Burn" button.
If you do not need detailed settings for recording and adding new utilities, then install the Iso File Burning program. Launch this application. Specify the path to the required file, select the drive and click the "Burn ISO" button. Wait for the file writing process to complete.
Often users personal computer encounter such situations when the game does not start without the disc from which the installation was made. For this, they were created special programs that allow you to create virtual images in your computer.
You will need
Instruction
To mount an image, make the image itself disk iso using the original disc and the copy program - Nero or Alcohol. Search the Internet for a program that can create a virtual drive. The program Alcohol or DaemonTools is suitable for you. Download the program to your computer hard drive and install it. It can be found on the site softodrom.ru. Install to the system directory of the hard drive on your .
Launch the program by double-clicking on the desktop shortcut. If you have chosen the Alcohol program, then the further algorithm of actions is quite simple. Find the inscription "Virtual disk" on the left side of the program screen, in the "Settings" section. A special program settings window will open.
In the "Virtual disk" section, change the number of virtual disks from "0" to "1" (or any number you need, usually one is enough). Check the boxes next to the items below, if necessary. Click OK to close the settings window. It is also worth noting that virtual disks depend on the further formation of sectors in the "My Computer" tab.
Wait while the program makes changes to the operating system. As a result of its work, a new section will appear called "Virtual DVD / CD drives" with a highlighted letter, for example, G. Right-click on the letter of the virtual drive and select "Mount image" from the menu. After a couple of seconds, you will get a full-fledged drive, in which the disk will be displayed.
You can add all the necessary disk images to the main program area by right-clicking on an empty space and selecting "Add Images". Images are easy to manage using the pop-up menu provided by the program.
Sources:
A disk image is the most accurate copy of the contents of an optical media, the creation of which preserves not only the original files, but also the details of their location, including file system disk. This allows you to use the image both for burning removable media (CD or DVD) and for working with a virtual disk without an optical drive. As part of the operating Windows systems, Mac OS, Unix there are no programs for creating a disk image, so you will have to use applications from other manufacturers.
Instruction
Choose a program that has DVD imaging features. As a rule, this option is included in the arsenal of applications designed for recording or emulating optical media- Nero Burning ROM, Alcohol 120%, Daemon Tools and others. Choose, for example, Daemon Tools Lite is a free version of Daemon Tools that has a language interface that can create and mount CDs and DVDs. It can mount images of any format, but create images only in mds/mdf format.
Download the program directly from the manufacturer's website, the corresponding link is placed on this page - http://daemon-tools.cc/rus/products/dtLite. After downloading and installing the application, right-click on its icon in the taskbar notification area (in the "tray"). In the pop-up context menu, select the topmost item - "DAEMON Tools panel". As a result, a narrow strip with the controls of this application will be placed along the bottom edge of the screen.
Click on the "Create image" icon in the central part of the panel, and the application will open a separate window with a minimum set of settings. In the Output file field, specify the directory on your computer where the program should place the created DVD image. Leave the rest of the settings with the default settings.
Place the source disc in the DVD drive, wait for the OS to familiarize itself with its contents, and click the "Update" button. After that, click on the "Start" button and the program will begin the process of creating a DVD image, showing its progress on the screen. Wait until the end of the process and two files with mdf and mds extensions will appear in the folder you specified, which will contain the DVD image.
Related videos
All more users prefer to store data from CDs and DVDs in the form of their image. This helps you quickly access the information you need or create an exact copy of the previous disc.
You will need
Instruction
You can use many different utilities to create a disk image. All of them have their own advantages and disadvantages. If you choose to use Daemon Tools Pro, install it and restart your computer. This is required to complete the installation of the application. Launch the Daemon Tools Pro utility.
Insert the desired disc into the DVD drive. Open the "Service" tab and select the "Create image" item, or simply click on a similar inscription located in the left menu of the working window. After the window with the title "Create an image" appears, select the desired drive in the "Drive" field. Select from the suggested options the speed of disk reading. It is better to specify the maximum allowed value in order to speed up the process of creating an ISO image.
In the "Output image file" item, specify the folder where the created ISO file will be saved. Check the boxes next to "Delete image on error" and "Add to image catalog". Set a password for the future ISO file, if necessary. Now press the "Start" button and wait for the new menu to appear. Check the "Close this window when successful completion' by checking the box next to it. Wait for the program to finish creating the ISO image.
If you have Daemon Tools Lite installed, then run it and wait for the corresponding icon to appear in the system tray. Right-click on it and select Create Image. Follow the algorithm described in the previous steps. Be aware that not all versions of Daemon Tools Lite are designed for imaging.
Note that the creators of Daemon Tools recommend using Pro version to create images. If there is an opportunity, then use it. Alternatively, you can try creating an image with the Alcohol utility.
A disk image contains all the data that can be found on a regular CD or DVD disc. If reading a CD requires the presence of an appropriate device, then a virtual drive must be created for the virtual disk. Mounting a disk image to a virtual drive in Daemon Tools Pro can be done in a few steps.
Instruction
Launch the Daemon Tools Pro application. At the bottom of the program window, switch to the virtual disks overview tab - Virtual CD / DVD Devices. The panel is located either at the very bottom, or immediately above the toggle switches. In the top menu bar, select the “Tools” section and call the “Add virtual IDE drive» (Add IDE Virtual Drive). This command can also be called in the drop-down menu by right-clicking in any free area in the Virtual CD / DVD Devices field. If the program window is configured to display the Basic panel, click on the corresponding icon with a “+” sign.
Wait while the program creates a new virtual disk. In the Virtual CD/DVD Devices field, an icon for a still empty drive will appear. Until you mount an image on it, it will be labeled Empty. Select the disk icon with the left mouse button and select the "Mount Image" item from the "Tasks Panel". Alternatively, select the Mount command from the Tools menu, or right-click on the disk icon and select Mount Image from the drop-down menu.
A window will open - specify in it the path to the disk image in .iso format, (.mds, .mdf, and so on) and press the Enter key or the "Open" button. Wait for the disk image to be mounted to the virtual drive. After that, you can close the Daemon Tools Pro program. Open the "My Computer" item, the newly created drive with the image mounted on it will be in the list of available resources after all local and removable drives on your computer.
Removing virtual hard drives and drives is far from the last item on the list of Windows cleaning activities. And of course, you should not leave it unattended. Why clutter up the operating system with unnecessary images and partitions, and in general, in fact, the entire computer? And beginners can even get confused in the search. useful information among such "heaps".
Of these step by step instructions you will learn how to delete a virtual disk created using standard tools and drive emulators (UltraISO, Alcohol 120%, Daemon Tools).
1. Click Start.
2. In the panel that opens, right-click the "Computer" section.
3. In the drop-down list of options, select "Management".
4. In the window that appears, in the left block, click the "Disk Management" item.
5. Right-click on the virtual partition you want to remove.
6. In the contextual list that opens, select "Delete volume ...".
7. Confirm the launch of the command: in the Delete Simple Volume window, click Yes.
1. Press the "Win" and "R" keys together.
2. In the open line, type - cmd.
3. Press "Enter" or click "OK".
4. In the console window command line enter the command:
For example, subst X: /D (delete partition X).
1. In the upper part of the program window, open the "Options" section by clicking the left mouse button.
2. Go to the "Settings ..." subsection.
3. In the settings panel that appears, click the "Virtual drive" tab.
4. Click the "Number of Devices" dropdown list.
5. Set to No.
6. Click OK.
After the settings you have made take effect, the emulated drive will disappear.
1. Right-click in the utility panel the drive you want to remove.
2. In the list that appears, click the "Unmount" directive.
Attention! To remove an image from the catalog, also right-click on it and run the "Delete Item" command from the list.
1. In the program control panel (block in the left part of the window), in the "Settings" section, click "Virtual Disk".
2. In the settings window, open the "Number of virtual disks" option by clicking the left button.
3. Set the parameter value - "0".
4. Click OK.
Successful cleaning and windows settings!
